0
What else can I help you with?
What does CO2 smell like?
Does Carbon Monoxide Smell? No, carbon monoxide has no smell. Carbon monoxide is an odorless, colorless gas that’s a byproduct of combustion. As a homeowner, this means it can leak from your gas furnace, stove, dryer, and water heater as well as wood stove/fireplace. The fact that carbon monoxide has no smell, color, or taste makes it impossible for us to detect. This gas is an unseen risk, the exposure to which may prove fatal. To keep your family safe, it’s important to identify all the possible sources of CO in your residence and to properly install and maintain carbon monoxide detectors in your home.
Fuel feeding in cfbc boilers?
In cfbc boiler fuel system like a very important funtion of in all process. fuel feeding have two types one is over beding system and other one is under bed system.In over bed system coal is carried by conveyer belt from bunker to spreader that's time coal size approx 6-10 mm crushed.spreader distribute coal on the surface of bed uniformly.This type of fuel feeding system accept over size of fuel also.In compared with under feeding system this is more reliable.Now these days have some boiler have both feeding system.In under bed feeding coal size crushed approx 1-6 mm which is throw from conveyer to combustion panel.
What is a non-adaptive robot?
A non-adaptive robot is that will follow the instructions it is given despite changes in the environment. It will only stoop until it is shut it down by a human operator. Non-adaptive robots are also known as open-loop systems, as they don't receive feedback from the environment and is hence incapable of making decisions and altering the output Non-adaptive robots are commonly used in the industry for many tasks, including welding a spot, putting steel into a furnace and drilling a hole. They may be reprogrammable, which means that they may alter their tasks by accepting new instructions. This is, however, only possible when the robot is equipped to perform the new task.
What part of a gas furnace allows the air within the furnace to blend with the products of combustion?
The air and combustion products blend in the combustion chamber of a gas furnace. This is where the fuel and air mixture is ignited and the heat is produced.
How to check Lining in an oil furnace combustion chamber?
Unbolt the burner and slide it out of the way.
What is the difference between a closed combustion furnace and open combustion furnace?
A closed combustion furnace has a sealed combustion chamber, drawing outside air for combustion and expelling combustion gases outside through a dedicated vent, resulting in higher energy efficiency and indoor air quality. An open combustion furnace draws air from inside the home for combustion and expels gases through a chimney, potentially leading to energy loss and indoor air quality issues.
What is the function of the inducer motor in a furnace?
The inducer motor in a furnace helps to create a draft that moves harmful gases out of the combustion chamber and safely vents them outside.
What uses less gas a furnace or fireplace?
fireplace
Can a gas fireplace and a furnace share a chimney?
If both fireplace and furnace are BOTH gas, if the flue has the correct size, AND if your building code permits, yes. If furnace and fireplace are different fuels, no. Check with your local building inspection department.
How do you prevent carbone monoxide from gas furnace?
Proper ventilation, and no leaks in the exhaust. Hopefully your furnace is also drawing outside air to the combustion chamber instead of inside air (the way that older furnaces worked).
What is the function of the inducer motor in a furnace and how does it contribute to the overall operation of the heating system?
The inducer motor in a furnace helps to create a draft that pulls air and gases through the combustion chamber and out of the exhaust system. This process is essential for proper combustion and ventilation in the heating system, ensuring efficient and safe operation.
What is a furnace draft control?
A furnace draft control is a system used to regulate the flow of air and combustion gases within a furnace. It helps maintain optimal combustion efficiency by adjusting the draft pressure, ensuring that the right amount of air enters the combustion chamber while allowing exhaust gases to exit properly. This control can enhance fuel efficiency, improve heating performance, and reduce harmful emissions. Proper draft control is crucial for safe and effective furnace operation.
How do you replace the combustion chamber liner in an oil furnace?
My oil burner firebox ceramic liner has places where the liner has flaked off and needs to be realigned. How do you do that and where'd you get the materials?
Is the furnace an internal or external combustion engine?
An ordinary furnace is not an engine at all, because it does not directly cause mechanical motion. The heat or expanding gases released in a furnace can be used to drive an engine, but that is a separate component from the furnace. If a furnace is used in this manner, the engine is an external combustion engine.
What is the bottom of a chimney?
A furnace or fireplace or the ash dump box.
