Subjects>Engineering & Technology>Other Engineering

What is the tonnage for an AAON RK-60-2-EO?

Anonymous

∙ 10y ago

Updated: 3/31/2025

The AAON RK-60-2-EO is a rooftop unit with a cooling capacity of approximately 60 tons. It is designed for commercial HVAC applications, providing efficient cooling and heating solutions. Always refer to the manufacturer's specifications for precise details and performance metrics.

AnswerBot

∙ 3mo ago

What else can I help you with?

Continue Learning about Other Engineering

Can metal be bent?

Bending is a process by which metal can be deformed by plastically deforming the material and changing its shape. The material is stressed beyond the yield strength but below the ultimate tensile strength. The surface area of the material does not change much. Bending usually refers to deformation about one axis.Bending is a flexible process by which many different shapes can be produced. Standard die sets are used to produce a wide variety of shapes. The material is placed on the die, and positioned in place with stops and/or gages. It is held in place with hold-downs. The upper part of the press, the ram with the appropriately shaped punch descends and forms the v-shaped bend.Bending is done using Press Brakes. Press Brakes normally have a capacity of 20 to 200 tons to accommodate stock from 1m to 4.5m (3 feet to 15 feet). Larger and smaller presses are used for specialized applications. Programmable back gages, and multiple die sets available currently can make for a very economical process.Air Bending is done with the punch touching the workpiece and the workpiece, not bottoming in the lower cavity. This is called air bending. As the punch is released, the workpiece ends up with less bend than that on the punch (greater included angle). This is called spring-back. The amount of spring back depends on the material, thickness, grain and temper. The spring back usually ranges from 5 to 10 degrees. Usually the same angle is used in both the punch and the die to minimize setup time. The inner radius of the bend is the same as the radius on the punch.Bottoming or Coining is the bending process where the punch and the workpiece bottom on the die. This makes for a controlled angle with very little spring back. The tonnage required on this type of press is more than in air bending. The inner radius of the workpiece should be a minimum of 1 material thickness in the case of bottoming; and upto 0.75 material thickness, in the case of coining.

How do you determine AAON tonnage by serial number?

you don't, it's in the model number. the first 2 numbers are the tonnage

AAON Inc tonnage info for air cooled units?

Packaged rooftop units - 2-230 tons

What is AAON's population?

The population of AAON is 1,000.

When was AAON created?

AAON was created in 1988.

What is the motto of AAON?

The motto of AAON is 'Defining Quality. Building Comfort.'.

What type of system is a rk aaon unit?

An RK-AAON unit is a rooftop air conditioning unit that is manufactured by AAON, a company known for providing high-quality HVAC equipment for commercial and industrial applications. These units are designed to be installed on the rooftop of a building and are typically used for heating, cooling, and ventilation purposes.

Where could you find a parts manual for an aaon rk series rooftop unit?

stores.affiliatedparts.com

What is burthen tonnage?

what is the burthen tonnage

What does tonnage mean?

navy ships are clasified by weight or tonnage, total tonnage, [all the ships]

What is the tonnage on a Intercity PH5048AKB1?

The 48 in the serial number denotes the tonnage. Divide that number by 12 to get the tonnage of 4.