0
A set of winding stairs loosely resembles an Archimedes screw.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
What are the simple machines used in the television?
The simple machines are mechanical devices. The television is an electronic device. As one sits and watches a program, the television is not doing anything mechanical. Unless it's 1884, your name is Paul Gottlieb Nipkow, and your television set has a scanning disk in it.
How do you machine an angle on a milling machine?
It depends on what milling machine you are using. If its the over head type (looks like a drilling machine) or if its the type where an arbour runs horizontal to the machine - line a circular saw. IN the prior you and incline the the head of the machine to the angle you need and using the correct cutter type cun angle slots end angles etc. If your using the latter machine you would normally set the jig, vice or securing system to the angle you want and use the machine to cut the work piece. There are numourus ways to cut anglles on millers its dependant on the machine you have, cutters available, work piece securing equipment and finally the type of angle required
What does the simple machines help us?
Simple machines are the most basic ways of making work easier or more efficient. There are 6 of them (if the different kinds of levers are considered the same simple machine): Inclined plane: Spreads out the work needed to move the object, so less is needed at once. Lever (first class): Changes direction of force applied. Load is on the opposite side of the fulcrum than the side that the force is applied on. Lever (second class): The load and force are on the same side of the fulcrum, with the force being applied further from the fulcrum. The work is easier, but the load isn't lifted as high. Lever (third class): Similar to second class levers, the load and force are on the same side as the fulcrum, but the force is closer to the fulcrum. The work is therefore harder, but the load is lifted more efficiently Wheel and axle: Just what it sounds like. The wheel is a simple, but brilliant tool that makes it so the inside and the outside make the same amount of rotations in the same amount of time, but move at different speeds. Turning the axle makes the outside of the wheel move fast, while turning the outside of the wheel makes turning the axle easy. Pulley: Made up of a wheel and a rope, the rope fitting on the groove of the wheel. This machine can either change the direction of the force, increase the efficiency of lifting a load, or make lifting the load easier. The more times the rope goes around a set of two wheels, the more efficient the pulley gets Screw: Changes the direction of force from around in a circle to down. The tool the "Screw" was named after this simple machine. Wedge: Also changes the direction of force from in one direction to out. This is used by scissors, axes, knives, or anything else that can cut.
A set of statements that explains why a phenomenon occurs is called a?
a theory
How do you set objectives to overcome any development needs?
Development needs are objectives outlined in an engineering project. Setting objectives like a problem solving team can be essential to overcoming these needs.
What kind of simple machine a ladder?
A ladder is not a simple machine at all; it is just a set of movable steps that allows the real machine - you! - to move with better handholds and footholds.
What kind of simple machine is a ladder?
A ladder is not a simple machine at all; it is just a set of movable steps that allows the real machine - you! - to move with better handholds and footholds.
Show you how to build stairs?
The best place to get simple instructions on how to build a set of stairs is in the booklet that comes with a carpenters framing square. A Stanley brand square would come with booklet.
How do you get in the research facility in poptropica?
You use the machine and set it to high :D simple as that
What type of simple machine is a swing set?
Pendulum-type
What kind of machine is a ladder?
A ladder is not a simple machine at all; it is just a set of movable steps that allows the real machine - you! - to move with better handholds and footholds.
What simple machine was created before the AM radio were used to accomplish a similar task?
crystal set
A simple machine with a flat surface set at an angle to a horizontal surface?
A simple machine that consists of a flat surface set at an angle to a horizontal surface is known as a ramp. Ramps make it easier to move heavy objects on wheels up or down levels.
What should i make for my goats to climb on?
Making a simple set of stairs leading to a wooden board is perfect. But if you really want to pamper your goat an old outdoor play set is great.
How do you repair a set of stairs after the ground has subsided beneath them?
You will need a professional concrete contractor to set a foundation for the stairs,
How many steps make a flight of stairs?
A flight of stairs is an uninterrupted set of steps. The answer could be the same or different for any given flight of stairs! A flight of stairs is an uninterrupted set of steps. The answer could be the same or different for any given flight of stairs!
What is the worlds biggest set of stairs?
the biggest stairs are in the Cn Tower in canada.
