RS-232
Normally used in the communications industry these are a outer sleeve with anything fron 1 to 100 smaller cables in their own colour coded sleeves inside. An example around the house would be a telephone line
The difference between baseband coaxial and broadband coaxial cable is baseband coaxial technology uses digital signaling in which the cable carries only one type of digital signal. Where as the broadband coaxial technology typically transmits analog signals and is capable of transmitting multiple frequencies of data simultaneously.
An mpp-1150 interface is used with the Atari computer serial interface that connects to a printer 36-pin Centronics connector.
You use a look ahead carry adder to reduce the propagation delay effects caused by the ripple carry that would otherwise be used. With ripple carry, each stage is dependent on the preceding stage, and this is cumulative. With look ahead carry, the carries are computed in parallel, speeding up the overall process.
Applications:- Analogue TV systems: to transmit color information.- For transmitting stereo information in FM sound broadcast at VHF- One important application of DSB is the transmission of color information in a TV signal.- CB radio- TV broadcasting- Air traffic control radios- Garage door opens keyless remotes- DSB-SC is a technique used in electronic communication, most commonly for transmitting information via a radio carrier wave.- DSB-SC used in stereo transmission of FM radio.- Two way radio communications.
A serial wire can be used for several uses. Mainly, it's used for basic communication between different devices. The main advantage is the fact that serial communication can use only three wires. Parallel requires several more, typically eight, or sixteen, plus signalling, and traditionally is faster. But for simple communication between devices, which could be computers or other devices, serial communication can simplify things. Serial communication can also be used for great distances. The telegraph was serial communication. Hence "AT&T"!
multiplexer can be used as parallel to serial converter.
Is the laptop not USB? Or is the printer not USB? Assuming it is the printer, there are components that will allow a serial or parallel printer to be used. Serial or parallel socket (female) on one end, while a USB plug (male) is on the other. There are also single parallel to USB cables for directly connecting the parallel port on the printer to the USB port on the laptop.
You can connect two or more computers using the following cables: Network cable USB cable Serial (used in old computers) Parallel (used in old computers)
8
Cable covers are used to protect cables from damage. They prevent the cables from water, falling objects, and dust. They are used for both communication and power cables.
A Parallel bus has a relatively large number of wires bundled together that enable data to be transferred in parallel. This increases the throughput, or rate of data transfer, between the peripheral and the computer. A Serial bus can be defined as a transmission path over which the participants transmit their data serially, sequentially in time, and using a common medium. In the case of serial transmission, only a single communication link for transferring data from any given end to another one. In the case of parallel transmission, we use multiple numbers of parallel links for the simultaneous transmission of all the data bits in the network.
Traditional RS-232 serial cables were used by many older devices, including modems, mice, printers, and the first digital cameras.
SERIAL AND PARALLEL COMUNICATION MEANS THE METHOD USED FOR COMMUNICATION.IN SERIAL COMMUNICATION THE DATA THAT IS TO BE COMMUNICATED IS PASSED SERIALLY THAT IS ONE BY ONE.IN PARALLEL COMUNICATION THE DATAS ARE PASSED PARALLEL. SERIAL AND PARALLEL COMUNICATION MEANS THE METHOD USED FOR COMMUNICATION.IN SERIAL COMMUNICATION THE DATA THAT IS TO BE COMMUNICATED IS PASSED SERIALLY THAT IS ONE BY ONE.IN PARALLEL COMUNICATION THE DATAS ARE PASSED PARALLEL.
This depends entirely on the use of the cable. In a full features RS-232 cable there would be 9 cables. But most hardware that uses a serial cable doesn't have the need for all of these wires so the number may vary. regards, tesseract
This is a connector used in serial and parallel ports.
This is a connector used in serial and parallel ports.