3h-5h + 11 = 17 is ------2h + 11 = 17- 11 -11____________-2h = 6___ ___-2 -2h = -3 (This is the answer.)
- 3h - 2h + 6h + 9 = h + 9
When h=10, 2h-9 = 2(10)-9 = 20-9 = 11 .
5k - 2*(h - 8k) = 5k - 2h + 16k = 21k - 2h
You do not need the distributive property for to do that!
A lock nut should go on a bolt before a washer or the nut.
The lock nut may not tighten properly due to incorrect threading alignment or damage to the nut or bolt. It is important to ensure that the threads are clean and properly aligned before attempting to tighten the lock nut.
2"
The correct order for installing a lock washer is to place it between the nut and the surface being fastened, with the teeth of the lock washer facing towards the nut.
To remove a 2H nut on a 1-inch bolt, you will typically need a 1-inch socket. However, it's important to verify the specific size as nut dimensions can vary slightly depending on the manufacturer and standards. Always ensure you have the correct tools by checking the specifications before attempting removal.
To use lock washers effectively in a mechanical assembly, place the lock washer between the nut and the surface being fastened. The teeth of the lock washer should face towards the nut to prevent loosening due to vibrations or movement. Tighten the nut securely to ensure the lock washer is engaged properly.
A lock nut goes on a bolt with the nylon ring side facing towards the bolt head to prevent it from loosening.
Yes, if one has been fitted.
A bike wheel lock nut is a small nut that is used to secure the wheel to the frame of a bicycle. It helps prevent the wheel from being easily removed by thieves, making it more difficult for them to steal the bike. The lock nut adds an extra layer of security to the bike, along with other locking mechanisms such as a bike lock or chain.
To remove a lock nut from a Citroën Saxo without the key, you can use a few methods. One approach is to use a locking wheel nut removal tool, which grips the nut and allows you to turn it off. Alternatively, you might try to carefully hammer a socket onto the lock nut to grip it tightly and then unscrew it. If these methods fail, you may need to drill out the lock nut or seek professional assistance to avoid damaging the wheel.
2h + 2h + 2h = 6h
You need a pipe wrench. Try to borrow-they are pricey.