answersLogoWhite

0

Mine has three adjustments: 1. There is a little twist knob on the side near the nozzle that adjusts droplet size from drops to a mist. You want drops for a lawn, mist for ornamental plants. 2. There is a knob on the top of the nozzle that adjusts the throw (distance) that the sprinkler sprays. It should indicate which way to twist for further or shorter. Sometimes it helps to put a little pressure on the front of the nozzle to help make twisting this knob easier. 3. There are stops on the stem that adjust it from a wedge to almost a full circle. The further you spread them, the bigger the wedge. There is a lever/switch that hits the stops to make the sprinkler reverse. If you want a full circle, you should be able to lift this lever or flip it up away from the stops so that it never hits them.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How can I properly adjust my lawn sprinkler heads for optimal watering coverage?

To properly adjust your lawn sprinkler heads for optimal watering coverage, follow these steps: Turn on the sprinkler system and observe the water pattern. Use a screwdriver to adjust the spray distance and direction of each sprinkler head. Make sure the water is reaching all areas of your lawn evenly. Check for any leaks or clogs in the sprinkler heads. Adjust the water pressure if needed to ensure proper coverage. Regularly check and adjust the sprinkler heads as needed to maintain optimal watering coverage.


How can I set up an oscillating sprinkler in my yard?

To set up an oscillating sprinkler in your yard, first connect it to a garden hose. Place the sprinkler on a flat surface in the area you want to water. Adjust the range and pattern settings on the sprinkler to cover the desired area. Turn on the water and adjust the flow to achieve the desired watering intensity. Monitor the sprinkler to ensure even coverage and adjust as needed.


How can I set sprinkler heads properly?

To set sprinkler heads properly, follow these steps: Measure the water coverage area of each sprinkler head. Adjust the spray pattern and distance of the sprinkler head to ensure even water distribution. Check for any obstructions that may block the water flow. Test the sprinkler system to ensure proper coverage and adjust as needed.


How can I adjust an oscillating sprinkler to ensure proper coverage and watering of my lawn?

To adjust an oscillating sprinkler for proper coverage and watering of your lawn, follow these steps: Place the sprinkler in the center of the area you want to water. Adjust the range and width settings on the sprinkler to cover the entire lawn. Position the sprinkler so that it sprays evenly across the lawn, avoiding any obstacles. Check for any leaks or blockages in the sprinkler and make sure it is securely connected to the hose. Test the sprinkler to ensure it is watering the lawn evenly and adjust as needed.


How does an impulse sprinkler work?

An impulse sprinkler or 'impact sprinkler', works as follows:- Water enters the bottom of the sprinkler through the bearing nipple, proceeds up through the body and exits out the nozzle. When the water hits the arm, it is propelled out away from the sprinkler. This action causes the arm to pivot away from the water stream, creating tension on the arm spring. When the spring tension is stronger than the force against it, the arm moves quickly toward the water stream and "impacts" against the body. This "impact" causes the sprinkler to turn in a very consistent manner. This is where the term "impact" was derived from.


How can I adjust Rainbird sprinkler heads for optimal performance?

To adjust Rainbird sprinkler heads for optimal performance, follow these steps: Use a small flat-head screwdriver to adjust the spray pattern by turning the screw on top of the sprinkler head. Adjust the distance of the spray by turning the radius adjustment screw located on the side of the sprinkler head. Make sure the nozzle is clean and free of debris to ensure proper water distribution. Check the water pressure and adjust as needed to prevent over or under-watering. Regularly inspect and maintain the sprinkler heads to ensure they are functioning properly.


How can I properly adjust rotating sprinkler heads to ensure optimal coverage and efficiency in my irrigation system?

To properly adjust rotating sprinkler heads for optimal coverage and efficiency in your irrigation system, follow these steps: Start by identifying the specific area that needs watering and the type of plants or grass in that area. Adjust the distance and angle of the sprinkler head to ensure that water reaches all areas evenly. Check for any obstructions that may block the water flow and adjust the sprinkler head accordingly. Monitor the water pressure and adjust it as needed to prevent over or under-watering. Regularly check and maintain the sprinkler heads to ensure they are functioning properly. By following these steps, you can ensure that your rotating sprinkler heads provide optimal coverage and efficiency in your irrigation system.


How can I adjust the orbit sprinkler to ensure proper watering coverage?

To adjust an orbit sprinkler for proper watering coverage, you can change the angle and distance of the spray by adjusting the nozzle or the sprinkler head. Make sure the water reaches all areas of your lawn or garden evenly by positioning the sprinkler in the center of the area and adjusting the spray pattern as needed.


How can I properly adjust sprinkler heads to ensure optimal watering coverage in my lawn?

To properly adjust sprinkler heads for optimal watering coverage in your lawn, follow these steps: Use a screwdriver to adjust the spray pattern and distance of the sprinkler head. Make sure the water reaches all areas of your lawn without overlapping or leaving dry spots. Check for any obstructions that may block the water flow. Test the sprinkler system to ensure even coverage and make adjustments as needed.


How do you adjust Rain Bird sprinkler heads?

To adjust Rain Bird sprinkler heads, locate the adjustment screw on the top of the sprinkler head and use a screwdriver to turn it clockwise or counterclockwise to adjust the spray pattern and distance. You can also adjust the arc of the spray by turning the nozzle turret.


How can I prevent water pooling around a sprinkler head?

To prevent water pooling around a sprinkler head, ensure the sprinkler head is level with the ground, adjust the spray pattern to avoid overspray, and check for any obstructions that may be blocking the water flow. Additionally, make sure the soil is properly graded to allow for proper drainage away from the sprinkler head.


How can I effectively water my garden using a mist sprinkler system?

To effectively water your garden using a mist sprinkler system, make sure to adjust the sprinkler heads to ensure even coverage, water early in the morning to reduce evaporation, and avoid overwatering by monitoring the soil moisture levels regularly.