On the top of the reel there is a line tightener that you can tighten or loosen with your thumb and index finger. If you twist it completely to the left to loosen it all the way and gently lift up on the spool, the tightener will come off. Then you remove the line from the spool and service the internals of your reel.
Creel
You can order the spare spool from your local tackle stores who can then order for Shimano Australia based in Sydney. The spare part # is ZRD 7252. Shimano Australia only sells on wholesale. The cost is about AUD8.00 Good luck
Stop motor. Remove line spool. pull spool from shaft and remove cord or weeds from around shaft. Replace spool on shaft. Re start motor.
The Shimano Symetre 4000 FI is a versatile spinning reel designed for freshwater and light saltwater fishing. To operate, ensure the drag is adjusted appropriately and that the line is properly threaded through the guides and onto the spool. Regular maintenance involves rinsing with freshwater after use, lubricating moving parts, and checking the drag system for smooth operation. For detailed specifications and troubleshooting, refer to the official Shimano instruction manual specific to the Symetre 4000 FI model.
To remove the spool in a Weed Eater XT110, first, ensure the trimmer is turned off and unplugged. Press the tabs on the sides of the spool housing to release it, then pull the spool out of the housing. If necessary, you can also unwind any remaining line before replacing or refilling the spool. Always refer to the user manual for specific instructions related to your model.
To change the trimmer line on a Ryobi Expand-It, first remove the spool cover, then take out the spool and replace the trimmer line following the arrows on the spool. Finally, reassemble the spool cover.
To wind a Ryobi weed wacker spool, first remove the spool from the trimmer. Then, wind the trimmer line around the spool in the direction indicated on the spool. Make sure to evenly distribute the line and avoid overlapping. Finally, reattach the spool to the trimmer and you're ready to use it.
To change the spool on an RTE 115 trimmer, first, ensure the trimmer is turned off and unplugged for safety. Remove the old spool by pressing the release tabs on the spool cover and lifting it off. Then, insert a new spool by aligning it with the spool holder and ensuring the line feeds through the eyelets. Finally, replace the spool cover securely, and the trimmer is ready for use.
To change the spool on a Ryobi trimmer, first, remove the trimmer head by pressing the tabs on the side. Then, remove the old spool and replace it with a new one, making sure it is securely in place. Finally, reattach the trimmer head and you're ready to trim.
To string a Ryobi weed wacker, first remove the spool cover and old string. Then, insert the new string through the holes in the spool and wind it in the direction indicated on the spool. Finally, replace the spool cover and trim any excess string.
To load the Ryobi trimmer head, first remove the spool cover and line up the arrows on the spool with the eyelets on the trimmer head. Insert the line into the eyelets and wind it in the direction indicated on the spool. Make sure the line is secure and replace the spool cover.
To replace the line on your Ryobi line trimmer, first, remove the spool cover and take out the spool. Cut a length of new trimmer line, thread it through the holes on the spool, and wind it evenly. Reassemble the spool and cover, and you're ready to trim.