it depens how big the space is that u need to cover i would recomend 2 inches is enough
Can't answer unless we know the depth of the gravel and width of the area.
16.36 cubic yards.
typically the size of peas hence the name pea gravel
$8.00
To determine how much pea gravel is needed to cover a 600 square foot driveway, you first need to decide on the desired depth of the gravel layer, typically 2-3 inches. For example, if you choose a depth of 3 inches (0.25 feet), you would calculate the volume by multiplying the area by the depth: 600 sq ft x 0.25 ft = 150 cubic feet. Since pea gravel typically weighs about 100-110 pounds per cubic foot, you would need approximately 15,000-16,500 pounds of pea gravel, which translates to about 7.5-8.25 tons.
The coverage area of 5 cubic feet of pea gravel will depend on the thickness at which it is spread. To determine this, you will need to know the desired depth of the pea gravel. You can calculate the square footage coverage by dividing the volume of the gravel (5 cubic feet) by the desired depth in feet.
32
The sub-grade's compacted soil, topped by the sub-base of crushed stone and then the pea gravel.
Pea gravel works if you use it at the bottom of an aquarium. You can also use it to make walkways and other concrete surfaces.
To effectively use a pea gravel sifter, pour the gravel onto the sifter and shake it gently to allow smaller debris to fall through the holes. Remove any larger debris by hand. Repeat the process until the gravel is clean.
1 cubic yard = 1.3 tons
Same