On average a ton @ apx 2 in will cover the APX. area of a full size pickup truck, this isn't a science but good rule of thumb. I personally use it to figure a layout for patio and walkway base stone or sand.
You will need about 463 cubic yards (around 594 tons) of gravel for this area.
You would need about 13 cu yards or about 15 tons.
62/3 cubic yards for every 1-foot deep. 5 cubic yards for every 9-inches deep. 31/3 cubic yards for every 6-inches deep. 5/9 cubic yard for every 1-inch deep.
2800 feet of gravel
A yard of pea gravel typically covers an area of about 100 square feet at a depth of 3 inches. If spread more thinly, such as at 2 inches deep, it can cover approximately 150 square feet. The exact coverage can vary based on the size of the gravel and how densely it is packed. Always consider the desired depth when calculating coverage.
It depends how deep you want the gravel to cover, if you want it to be 2 inches deep it's going to cost more than 5 inches. Also it depends how big the gravel is cut, I think that the smaller the gravel is the more it costs.
Based on sand and gravel calculator found on L.R. Faulk Construction Co. site, 1 ton of gravel (clean rock) will equal approximately 7.3 sq. ft x 6 inches deep, or 5.2 sq. ft x 3 inches deep. A ton of gravel will cover approximately 15 square yards (135 square feet) at 3 inches deep.
It depends how deep you go. If you do 2 inches deep the area will require at least 0.7 cubic yards (about 1,710 pounds) of gravel.
13 1/4
You'll need about 28.704 cubic yards (37 tons) of gravel.
Plan on about 2.2 cubic yards (2.8 tons) of gravel.
1 (cubic yard) = 46 656 cubic inchesIf the depth is 2 inches then the area it will cover is 46656/2 square inches = 23,328 square inches. Convert 23,328 square inches to square yards23 328 (square inches) = 18 square yards