answersLogoWhite

0

35, says it on the factory sticker on the lower limb.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you determine string or cable length for your compound bow?

what is the string length of a Mathew Mission compound bow


What length of string is used on a bear whitetail 2 The bow says 30 draw length 70 lb draw weight and 38 amo compound string length the cables are still there but main shooting string is missing?

38"


What is bow length of a recurve bow?

depending on the length of the bow which, i think should be 52", you'll need a 48" string.


Browning nomad stalker 52inch bow what length of bow string?

48"


What is the string and cable length on a jennings ck3.1r?

Bear says bow string length is 86.125in & buss cable length 31in


How do you adjust a pse silverhawk bow?

There should be two bolts on the bow, one on the top limb and one on the bottom limb


What is the bow string length for a diamond razors edge bow?

50 1/8


What type of compound bow packages are available?

Compound bow packages usually begin at around $400. Typical packages include the compound bow itself, a quiver, arrows, an archery glove, and a bow string guard.


How do you re-string a compound bow?

To re-string a compound bow, you must first get the bow limbs to bend. The easiest way (and the safest) is to place the bow, with the string above the bow (it will look like a smile) in what is called a "bow press". Once the bow is in the press, it is pushed down to bend the limbs ("compressed"), causing the string to go slack; the string is now removed from the cams and the new string is installed. De-compress the bow and remove it from the press.The bow press can be somewhat expensive to purchase, so it may be best to take the bow to an archery shop and have the string replaced there. Due to the amount of pressure required to bend the bow's limbs, as well as the need to keep them bent while changing the string, attempting to restring a compound bow without the proper equipment is definitely not recommended.


How strong is 30'' draw weight?

30" is not a draw weight, it is a draw length. It is the length of the draw from the bow to the string when the bow is drawn.


What is string length for Pearson Renegade bow 60 lb.?

I have a Pearson renegade 2 and the tag says 57" for string length


How do I change the draw length on a youth compound bow?

Draw the bow to full draw and hold it. Have your assistant place a nail in the small round hole in the bottom of each pulley wheel and then slowly let the pressure off of the bow string. Unhook the looped bowstring from the metal string connectors and set aside. Slide the connectors up and away from the bow limbs and pull them out of the pulley wheels. Move the connectors to a new hole or position on the wheels (a higher hole if you want the draw length shorter or a lower hole if you want the draw length longer). Reconnect the string to the metal string connectors and draw the bow to full draw again. Have your assistant pull the nails out of the pulley wheels and then let the bow down slowly. This process can also be performed by using a bow press to depress the bow's limbs and then changing the draw length in the same manner.