It could be a number of things, but fluorescent lighting in or near the room will cause what's called a "60Hz hum." If this is the case you could try to reverse the polarity on the 'Mains Plug'. i.e the AC mains leading to the step down transformer. Alternatively confirm the same by switching off circuits (Tubelights, television etc) one at a time, to see if this hum stops. Particularly if the hum stops when you switch of the television - have the TV repaired fopr faulty filter capacitor. If the hum is caused by earthing or neighbouring tubelights check the shield of the amplifier.The shield is supposed to be grounded to effectively eliminate the electric fields surrounding the same. If it's more like a buzzing sound, there may be a loose connection in either jack (the guitar's or the amp's) or the patch cable itself; there might be a poor solder somewhere; or you might just be picking up interference from a nearby electronic device. If it's really noticeable, you might consider taking the amplifier to a local repair shop and having them take a look at it. It could also be a poor ground, which will require re-wiring of the outlet or possibly the entire electrical system in that area of the building. Try plugging the amp into different outlets and see if the hum subsides; if it doesn't, it's likely an issue with the amp or the guitar themselves.
Yes, it is possible to plug a microphone into a guitar amp using a microphone input or an adapter.
This can happen and may require opening up the guitar to retighten the loose amp plug fitting from inside.
plug it into an amp
Common causes of guitar amp hum include improper grounding, electromagnetic interference, and faulty cables. To reduce or eliminate the hum, ensure proper grounding of the amp, use high-quality shielded cables, keep the amp away from sources of electromagnetic interference, and consider using a power conditioner or noise gate.
Yes, you definitely can.
Yes, you can plug a microphone into a guitar amp using a microphone cable and the amp's input jack. However, the sound quality may not be optimal as guitar amps are designed to amplify the sound of electric guitars, not microphones.
The input socket.
Yes, you can plug a bass into a guitar amp, but it may not produce the best sound quality due to differences in the instruments' frequencies and power handling capabilities.
To properly plug a microphone into a guitar amp, use an XLR cable to connect the microphone to the amp's input labeled "Mic" or "XLR." Adjust the volume and tone controls on the amp as needed for the best sound quality.
hahaha dude my amp does the same things. you just have radio interference, but mine does that when you hold a string on a fret.
To safely plug a bass into a guitar amp, use a direct box or a bass preamp to match the impedance levels, and avoid turning the volume too high to prevent damage to the amp and speakers.
beasty