For 3D Blu-Ray discs and 3D TV's, you will need a cable that meets the HDMI 1.4 specification. Most new cables can handle this.
HDMI is a common standard so connecting a Bluray player to any HDMI input is likely to work. Computer monitors vary little from their television counterparts but there are one or two reasons why it might not work. First, computer monitors may not be configured to handle broadcast HD signals. The timing and resolution are not standard computer formats so it is worth checking that the monitor can handle 720p 50Hz / 60Hz and 1080i 50Hz / 60Hz. Almost all should handle these format with ease but do the checking anyway. Second, a copy protection system called HDCP is used on most domestic HD equipment and it encodes signals on HDMI connectors. If the monitor does not support HDCP, there is a good chance that some or all of the output from the Bluray player will not be displayed. Once again, a check of the manual should show if the monitor is HDCP compliant.
You can purchase an adapter that almost alwys fits any USB cord or electrical cord. This adapters are located in many different stores, such as, Walmart o RadioShak.
Regions are global areas defined by the BluRay consortium. In order the allow the introduction of movies in different countries on different dates, most Bluray movies have a region code embedded in them. Bluray players will only play movies authored for the region in which they are sold. There are movies on the market, however, that are region-free, and can be played on any Bluray player anywhere in the world.
Any DVD player that is capable of playing HD material will have a logo on it to announce that it is HD capable. Look for either a BluRay logo or HDDVD logo. Even better, take a look at the manual.
No, but the HDMI cable also carries AUDIO.
Any television will work with a Bluray player but to get the full quality of the Bluray format, you will need an HD television with an HDMI input. Televisions that do not have an HMDI input can use the analog output from the player but the signal will be SD rather than HD.
Actually, Blu-Rays can only hook up to HDTVs by using an HDMI cable
To watch in high definition, you must have an HD television with an HDMI connection. However, using the analog outputs from a Bluray player, any standard definition television can be used.
No. You need a BluRay player that specifically says it can read 3-D disks
HDMI is a common standard so connecting a Bluray player to any HDMI input is likely to work. Computer monitors vary little from their television counterparts but there are one or two reasons why it might not work. First, computer monitors may not be configured to handle broadcast HD signals. The timing and resolution are not standard computer formats so it is worth checking that the monitor can handle 720p 50Hz / 60Hz and 1080i 50Hz / 60Hz. Almost all should handle these format with ease but do the checking anyway. Second, a copy protection system called HDCP is used on most domestic HD equipment and it encodes signals on HDMI connectors. If the monitor does not support HDCP, there is a good chance that some or all of the output from the Bluray player will not be displayed. Once again, a check of the manual should show if the monitor is HDCP compliant.
Yes you can. Virtually all Bluray players have an analog output which is standard definition. This can be connected to the video input of any television and you will see a standard definition image from a Bluray disc. The quality won't be as good as is on the disc of course but at least the disc will play. It is normally possible to set up the HDMI connector to output a standard definition signal. This is probably not of much use as almost all televisions that have HDMI inputs will also accept high definition signals. It might also be worth pointing out that standard DVDs will also play on a Bluray player. Using the analog output from the player with a standard DVD playing will give the same quality of image as any standard DVD player.
DVD players cannot play Bluray discs. The lasers and the data storage are different so no data can be read from a Bluray disc in a DVD drive. That is the case whether or not there is any up-scaling available in the player. Bluray players on the other hand are quite happy to play DVDs as well as Bluray discs.
To watch Bluray discs in high definition, an HDMI cable is required. However, most Bluray players have analog outputs that can be used if an HDMI port isn't available on a television. However, all analog connections are limited to SD quality.
Any HDMI cable will do. There aren't any variations in the cables
I have used the HDMI cables from cablewholesale for years with my HDTVs and Bluray players without any problem. The only time I deviated was when I bought my 60" Mitsubishi a couple of years ago and let the salesman talk me into a $30 high speed HDMI cable....don't know if it made a difference or not. Hope this helps.
HDCP is a method to encrypt the video and audio travelling on an AV cable (as for example the HDMI or DVI cable that connects your PC to the monitor or your Bluray player to your TV). This is done to prevent you from using the HDMI or DVI outputs of your computer (or bluray player), to copy the audio and video of a movie, by plugging the HDMI cable to the HDMI input of a recorder (yes, there are recorders with HDMI inputs, but they cannot record signals encrypted with HDCP). In plain english, HDCP prevents you from "lifting" the audio and video of an HD movie from the cable. The Hollywood studios mandate that both your playback device (aka computer or bluray player) and your monitor (aka PC monitor or TV) must support HDCP in order to be able to view Bluray-Movie content (and subscription HD satellite/cableTV channels too). On a practical level, any device with an HDMI plug supports HDCP*. But only some DVI devices support HDCP. If both your playback device and your monitor support HDCP, just forget about HDCP. If your are using a PC, just get a software Bluray player like WinDVD (sorry, no free ones exist) and start watching movies. If you are using a bluray player, just put the disc in and start watching, lol. If your playback device or monitor doesn't have HDCP, then the movie will either not play or play downscaled to standard definition (aka DVD quality). This is bad. One solution is to use a piece of software called AnyDVD HD that will convert a protected Bluray-Movie to an unprotected one like the ones you can make at home (it acts as an intemediate between the Bluray drive and the software player). HDCP is required only for protected Blurays, hence you have effectively dodged HDCP. Otherwise you can use the component output of your playback device, which mysteriously allows FullHD playback without HDCP (HDCP is not possible on component).
In order to watch the content in HD, you will need an HDMI cable. Most Bluray players also have analog standard definition outputs as well but you will not see optimum quality if you connect using any analog output.