Regular passive (non-amplified) speakers will need to be connected to a power amp (an old stereo receiver can do this). Connect the line out of the computer to the aux or tape in of the receiver, and then connect speaker cables from the receiver to each of the speakers.
If the TV has an audio output, connect this to a stereo amplifier, and then connect speakers to this. Modern TV's don't have amplifiers for external speakers.
The AW400 wireless speakers have a transmitter module. This module is plugged into your sound source (your TV or stereo or whatever). Each of the speakers is then plugged into the wall with its own power cord.
Find the audio-out port on the back of your PC or side of your laptop (usually a green marker with a picture of headphones or sound waves), and plug in headphones or speakers. If you only have the white and red stereo cables, head over to a wal-mart and buy a "Y-Splitter" so that it will fit into the computer and plug your stereo cables into the splitter.
It depends on the speakers. Bose computer speakers are not designed to connect directly to speaker inputs on your receiver, as they have their own amplifier. All Bose home stereo speakers can be connected.
You could use an external cable or satellite receiver and connect speakers to that.
If the TV has an audio output, connect this to a stereo amplifier, and then connect speakers to this. Modern TV's don't have amplifiers for external speakers.
You should have outputs in the back of the amplifier.
WITH AN "S CABLE"
It doesnt really matter how far your speakers are from the tower.
The AW400 wireless speakers have a transmitter module. This module is plugged into your sound source (your TV or stereo or whatever). Each of the speakers is then plugged into the wall with its own power cord.
The Marantz TT551 needs a phono preamp (usually found in older stereo receivers) and powered speakers or the amplifier inside the old stereo.
To hook up stereo speakers in a truck, attach the stereo wiring to the stereo and run it to the speakers. Clip the stereo speakers into the wires and place them in the panel spaces in the truck.
Find the audio-out port on the back of your PC or side of your laptop (usually a green marker with a picture of headphones or sound waves), and plug in headphones or speakers. If you only have the white and red stereo cables, head over to a wal-mart and buy a "Y-Splitter" so that it will fit into the computer and plug your stereo cables into the splitter.
Sonicgear 2.1 stereo Speaker (Tatoo 303)
Take the rcas from the amp and connect it to the + and - posts on one of your speakers.
connect speakers to pc
Dont understand your question because stereo speakers are normal speakers