Connect the sound system to the AUDIO OUTPUT connectors on the back of your TV. If theses connectors are not there you will need to get a new TV with these connectors or if there is a cable or Satt. box, connect the surround to these.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
An HDMI cable connects from the Bell cable box to the surround receiver and then to the TV.
You'll need a receiver with at least 2 HDMI inputs and 1 output, as well as an HD-capable cable box. Connect the XBOX and the cable box to the receiver with the HDMI cables, and then plug the HDMI output on the receiver to the TV.
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
Yes they do make wireless surround sound. If you purchase wireless receiver box you will have speakers that are in the front (which doesn't need to be wireless since it's connected to you TV) and you have the right and left which rest behind you. The wireless receiver box connects to a power outlet and sends the single to the two rear speakers. This setup eliminates running speaker wires from the receiver to your speakers.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
An HDMI cable connects from the Bell cable box to the surround receiver and then to the TV.
NO! They are expensive and do not give you surround sound. For the money, you could buy a 'Home Theater in the Box' and have true 5.1 or 7.1 surround sound.
The Emerson Hot Wheels Boom Box has acceptable bass for a child's radio.However it's not designed to suit an audiophile or to crank out a lot of bass.
It depends on what your looking for a ported box gives off more bass but a sealed box is a clearer sound
You'll need a receiver with at least 2 HDMI inputs and 1 output, as well as an HD-capable cable box. Connect the XBOX and the cable box to the receiver with the HDMI cables, and then plug the HDMI output on the receiver to the TV.
To connect a guitar to a bass amp for optimal sound quality, use a direct input box or a preamp to match the impedance levels of the guitar and bass amp. This will ensure the signal is properly balanced and the sound quality is preserved.
Connect the audio out of the TV to the audio input of the surround receiver with a dual RCA cable. Note that this connection isn't surround. You will need to connect a DVD, Blu-Ray or digital cable box to the surround receiver for true surround sound.
Yes. BUT. They will sound terrible. You will spend more money on fabricating the box for them than if you were to go out and buy some real theatre speakers.
You need a XSATA Hookup/cable or an Xplorer 360 Hookup/cable.
You unhook the connection from the cable box to the TV and connect it to the VCR input. You purchase a short cable and install it from the VCR output to where the cable was connected to the TV. The TV will get the cable box signal through the VCR with no problem when you are not using the VCR. If the cable box was connected to the surround sound or Home Theater and then the TV then connect the cable box to the VCR and then the surround sound or home theater.
Yes they do make wireless surround sound. If you purchase wireless receiver box you will have speakers that are in the front (which doesn't need to be wireless since it's connected to you TV) and you have the right and left which rest behind you. The wireless receiver box connects to a power outlet and sends the single to the two rear speakers. This setup eliminates running speaker wires from the receiver to your speakers.