Generally, white wires are positive. Red is usually negative. However, the construction of the electrical device could be different. It is best to check the instructions.
It actually does not matter as long as you are consistent. Most people choose to use the white stripe as positive, but it is definately not a rule.
Any marking (a white stripe, bump molded into the cable, different wire colours) is an indication for your reference only. It doesn't matter, as long as you connect the marked side on the amplifier to the same polarity on the speaker side.
Whichever one you connect to the positive terminal. The colors are there so you can find the same wire at the other end.
It doesn't really matter, as long as you connect them to the same polarity at both ends. Most people use the gold or reddish-copper wire as the positive, as it is the red terminal and the silver, or non-colored lead to the negative as it is black.
The new speakers come with un-stripped copper wires..... you need a pair of wire strippers.... i put in kenwood speakers and the size of the wire was 14 somethin. you would need to get a wire diagram for you car/truck to see the colors of the positive and negative wires. then look on the aftermarket speaker box to see which wire is negative and which one is positive.... After you would do all this, just match up negative to negative and positive to positive. simple as that. I'd recommend wire nutting the wires or electrical taping them... but DO NOT put all four wires together. that will mess your speakers' sound up completely. wire nut the positives together and then wire nut the negatives together.
The white stripe on clear speaker wire is usually the positive wire. You may also find it with dashes and this is still the one that will carry the positive charge.
yes.. had to find out myself with a multimeter and phone test,, white wire is positive on a samsung travel adapter.
Left Front Speaker Positive Wire (+): White/Red Left Front Speaker Negative Wire (-): Brown Right Front Speaker Positive Wire (+): Green Right Front Speaker Negative Wire (-): White/Orange
The positive wire for the 2005 Toyota Tacoma tail light is red with white stripes. The negative wire is white with black stripes.
1997 Chrysler LHS Auto Alarm Wiring GuideBattery Constant 12v+ Positive Wire (+): Pink/Black and RedBattery Constant 12v+ Positive Wire Location: Ignition Switch HarnessStarter Positive Wire (+): Yellow/Gold DotsStarter Positive Wire Location: Ignition Switch HarnessIgnition Positive Wire (+): Dark Blue/Gold DotsIgnition Positive Wire Location: Ignition Switch HarnessSecond Ignition Positive Wire (+): Red/White/Gold DotsSecond Ignition Positive Wire Location: Ignition Switch HarnessAccessory Positive Wire (+): Black/OrangeAccessory Positive Wire Location: Ignition Switch HarnessSecond Accessory Positive Wire (+): Black/WhiteSecond Accessory Positive Wire Location: Ignition Switch HarnessParking Light Positive Wire (+): Black/YellowParking Light Positive Wire Location: In Drivers Kick PanelPower Door Lock Positive Wire (+): Orange/WhitePower Door Lock Positive Wire Location: In White Plug, Back Of FuseboxPower Door Unlock Positive Wire (+): Pink/VioletPower Door Unlock Positive Wire Location: In White Plug, Back Of FuseboxDoor Trigger Wire: Tan (-) And Tan/Red (-) Use Both. When connecting an alarm system, the tan (-) is for the driver's side and the tan/red (-) is for the passenger's side use both wires and diode isolate.Door Trigger Wire Location: In Drivers Kick PanelDomelight Supervision Wire (-): Tan (Requires Relay)Domelight Supervision Wire Location: In Drivers Kick PanelTrunk Release Positive Wire (+): Black/White (Requires Relay)Trunk Release Positive Wire Location: At Trunk Release SwitchHorn Negative Wire (-): Black/RedHorn Negative Wire Location: At Relay In FuseboxTachometer Wire Negative Wire (-): Red, White Or BlackTachometer Wire Negative Wire Location: At Ignition Coil PackBrake Light Positive Wire (+): WhiteBrake Light Positive Wire Location: At Switch Above Brake PedalFactory Alarm Disarm Wire (-): Light Green/OrangeFactory Alarm Disarm Wire Location: In Either Kick PanelFactory Anti-Theft System: N/AFactory Anti-Theft System Location: N/A
The red wire is the positive wire. The black wire is the ground wire. The white wire is the auxiliary wire.
Means it's positive
The red wire is the positive wire. The black wire is the ground wire. The yellow wire is the speaker wire. The white wire is the auxiliary wire.
Black = Negative Black + White = Positive Tried and tested.
The red wire is the positive wire. The black wire is the ground wire. The green wire is the speaker wire. The white wire is the auxiliary wire.
The ground wire is a black. The positive wire is red. The speaker wires are yellow and green. The auxiliary wire is white.
You connect the positive one (commonly orange/white) to your dash lights positive.