0
A pre out or preamp out is a line level output of the sound that is coming out of the receiver. It is controlled by the volume control, and allows you to connect another external power amplifier to increase the power of the system or allow the connection additional speaker systems,
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Do you hook the surround sound to the TV or satellite?
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
How do you convert a coaxial cable to HDMI so it can plug it into a Pioneer VSX-1121K av receiver?
You can't. You will have to use a HD cable box with an HDMI output to connect this receiver.
Can you hook up an amplifier for a car to a AV receiver for a home theatre system?
It depends on the specific models of each, but typically, Yes. Of course you will need a 12VDC power supply for the amplifier, though. You will also need a AV receiver with a preamp output. You cannot run speaker level outputs into the input of an amplifier.
Where do you plug in the AV cables when hooking up a ps2 to connect to a dish receiver?
A Sony PlayStation 2 and a dish receiver are two video and audio sources, and cannot be directly connected to each other. You can plug both into a television that has multiple video and audio inputs, or connect them to a home theater receiver, and then connect that to your TV.
How to Hook up Yamaha home theatre system?
The actual task of hooking up a home theater may take a little time, especially if you are doing a custom installation with lots of separate components, but follows the basic principle of input and output. The Home Theater Path Think of source components, such as a DVD player, as the beginning point, and your television and loudspeakers as your end point. You have to get the video signal from your source component to your television or video display, and the audio signal to your loudspeakers. Answer:Read Your Owner's Manual If you are going with a home theater-in-a-box, the illustrations in your owner's manual are usually very simple to read and understand. Almost all the cables you need are already provided and the connections are even color coded to guide you through the setup process. Home Theater Set-up Example If you are assembling a collection of independent components, the task may seem a little more complicated, but actually follows the same general outline as a prepackaged system. In a basic setup that includes an television, AV receiver, a DVD player, and a VCR (or DVD recorder), here is an example of one approach, which is illustrated in general terms: 1. Connect your satellite, cable, or antenna to your VCR (or DVD recorder) and then to the television. This will allow both your television and your VCR (or DVD recorder) to be able to receive broadcast, cable, or satellite signals, depending on what service you have. If you have both a VCR and DVD recorder, you should have the incoming cable, satellite, or antenna signal split and connected to them separately, not from one to the other. 2.Connect the audio and video outputs of your VCR or DVD recorder to your AV receiver's VCR video inputs (if you have both a VCR and DVD recorder, use the AV receiver's VCR1 connections for the VCR and the VCR2 connections for the DVD recorder). Connect the AV receiver's VCR audio and video outputs to the audio and video inputs of your VCR. This will allow your VCR or DVD recorder to record video signals that come through the AV receiver or to play back tapes or DVDs for viewing on your television. In the case where you have both a VCR and DVD recorder connected to the AV receiver, you can dub non-copyprotected video tapes and DVDs between the two units via the AV receiver. 3. Connect one of the video outputs of your DVD player to the DVD player video input on your AV Receiver. In addition, also connect the digital optical or digital coaxial audio connection to your AV receiver. In order to access digital surround sound, you must make use of the DVD player's digital audio connections. NOTE: It is preferable to use Component or HDMI connections if your DVD player and AV receiver has either of these options available. If you have a Blu-ray or HD-DVD player, HDMI is definitely preferable. Also, with reference to audio, if your AV receiver has the ability to extract audio via HDMI, this is also preferable, but if not, use either the digital audio or 5.1 channel audio connections between the Blu-ray or HD-DVD player to your AV receiver in addition to the HDMI connection. 4. For connecting a CD-only player or changer to your AV receiver, you can use either the CD player's analog or digital audio outputs to the AV Receiver. If you have a CD-Recorder, connect it to your AV receiver through the Audio Tape Record/Playback input/output loop connections, as it functions much the same as a standard audio cassette deck. 5. Connect the TV monitor output of the AV receiver to one of the video inputs on your television. This allows you to view the video image from your VCR or DVD player on your television after it goes through the AV receiver. NOTE: Your AV receiver needs to be on and either the VCR or DVD player selected, with your TV switched to the video input (not channel 3 or another channel) in order to view the video feed from your AV receiver. 6. Connect the audio outputs of your TV (if it has them) to the TV or Aux audio inputs on your AV receiver. This allows watching standard television programs through your broadcast, cable, or satellite connection and to be able to hear stereo or surround sound audio from programs that have it, through your home theater system. 7. Connect your speakers up to the AV receiver. Pay attention to the correct polarity (positive and negative - red and black) and, make sure the speakers are connected to the correct channel (center, front left, front right, rear left, rear right on a five channel system). For more details on connecting and placing your speakers, check out my reference article: How Do I Position My Loudspeakers and Subwoofer? 8. Connect the subwoofer line output of the AV receiver to your subwoofer. The above setup description is a basic illustration on what to expect when hooking up your home theater system. The extent, combinations, and types of connections vary depending on how many and what types of components you have. Use All Available Resources To make your task easier, make use of the resources you have on hand. 1. Make sure you read the owner's manual and illustrations for all your components that outline your connection options. Also refer to my Home Theater Photo Connection Gallery for additional illustrations and explanations. For some additional component wiring diagrams, check out a useful AV Wiring Guide by Matt Torres, About.com Guide for TV/Video. 2. Make sure you have the correct audio, video, and loudspeaker connection cables, at the right lengths, to connect everything up. If you overlook something, don't panic, you just might need to make an extra trip to Radio Shack; it happens to all of us at some point during the setup procedure. 3. Don't hesitate to contact customer support for your product or your cable TV provider for further setup tips. 4. If the task becomes overwhelming and nothing seems to be "right", don't hesitate to pay someone (such as an installer that subcontracts with your local dealer) to do it for you. Even at $50 - 100 an hour, you will get a system that is set up quickly (in most cases, within an hour) and working properly. This can be money well spent, if the person you hire knows their job.
How many channels is the Sony STR DH700 AV receiver?
The Sony STR DH700 AV receiver has the power of 7.1 channels.
Is the Onkyo TX SR806 AV receiver a professional model?
The Onkyo TX SR806 AV receiver is THX Certified Professional.
How an connect your laptop to your AV receiver?
thru HDMI
How do you connect satellite to TV Tuner which has AV and HD jacks?
check first your satellite receiver if there is an HDMI jack. connect your HDMI cables from your satellite receiver to your tv tuner. if you don't have the HDMI jack, check the AV output jack. connect the AV cables from your satellite receiver to your tv tuner. you can use either AV or HDMI.
Which is the best AV receiver for surround sound?
One of the best AV receivers for surround sound is a Yamaha.
What is an AV receiver used for?
An AV receiver is used as part of a home entertainment system. It will amplify the sound, as well as provide an image signal so you can watch and listen to your television.
Where can one purchase a Yamaha AV receiver?
One can purchase a Yamaha AV receiver directly from the Yamaha site, resulting in the largest selection. In addition, many models can be found at retail sites like Amazon.
Do I need an AV receiver for my home theater system?
no you don't need an AV receiver for home theater system, it comes built in with it as I purchased last year for myself and it works well. almost turns room into a disco club.
How do I repair the audio in my HD TV?
HDTV audio out to AV Receiver in (with red & white optical cable) .... I had sync problems with CBS and adjusted my AV receiver to fix them Basically, this software allows you to add custom resolutions and fix
Will the Yamaha RX V365 AV receiver work with iPod?
You will be able to connect your iPod into the Yamaha RX V365 AV and have superior sound quality.
Can You Connect a AV Receiver to a MultiChannel Amp?
Yes if the frequences and amps are the same amount
Does the Sony STR DH500 AV receiver deliver crisp HD sound?
The Sony STR DH500 AV receiver delivers crisp 1080p resolution and stunning with 24p True Cinema technology that displays images at cinematic frame rates.
