An audio signal is a representation of sound, typically as an electrical voltage. Audio signals have frequencies in the audio frequency range of roughly 20 to 20,000 Hz (the limits of human hearing).
If I understand the question, you are trying to intertwine different functions. Like your ears, the audio input jack receives an audio source, while the audio output jack transmits outputs audio content - similar to your mouth. If you are trying to redirect the input audio directly to the audio output port you will need a "passthru" (aka monitor) function. -P2E
Boss audio has the same owner as Planet Audio and Sound Storm. BOSS was here first.. Then P.A, last was S.S.L
An optical audio cable is used to transmit digital audio (AC-3) signal from the source to the receiver, such as from a DVD player to a digital audio amplifier/receiver. You can transmit 5.1 dolby digital or DTS surround sound with an optical audio cable, same as digital coaxial audio cable.
It's when the computer's audio card is built in to the mainboard
It's the knock off of Panamax audio system.
She sand a song
were is it located the turn singnal flasher
Stimulus
C singnal is for stop
a snonim might be singnal or gester
i dont no for sure but he definelatly has 10000000000 girls chasing him
it is the part of the transmitter which modulate the singnal.
You have a weak ground connection.
it is most likely the turn signal flasher
noise is an undesired and unwanted sound or singnal in communication
replace hazard switch
Autoconduction is the heart's ability to generate its own electrical singnal rhythumically without neural stimulation.