40 watt light bulb
primary school large then 3600mm * 1000mm middle school large then 4000mm * 1000mm
That would depend on the size of the theater.
You will need to provide us with the model number of the Sanyo projector in order to determine the specs, bulb size, operating manual etc. Pro Xtrax is NOT the model number. It starts with PLC-Xxxx.
M8. 8mm thread. The length will depend upon the thickness of the mounting plate of your chosen bracket. The wall mounts all come with a large assortment of screws so you can find the righ size.
1080p is the resolution that should be used for a proector, because 720p in a prjojector would produce poorer image quality in a large size and would be overpriced as compared to 720p television.
It depends on the size of the lava lamp
Remove the lava lamp by lifting up the glass. It separates from the base because it just sits in it. Unscrew the old bulb and screw another one in. When you remove the bulb you will notice that the bulb and base may not be the size of a standard household bulb. On the inside of the base, or the bottom of the base, there should be information about the type and wattage of the bulb. You need to get the same type of bulb to insure that the bulb base will screw into the socket. The wrong type bulb may not fit in the socket or the bulb may be too large and the top of the lamp will not fit properly on the base. If you get the wrong wattage, the bulb may not be hot enough or to hit to make the bulb function properly.
The controlled variables in a lava lamp experiment could include the type and amount of wax and liquid used, the size and shape of the lamp, the temperature of the room, and the power of the light bulb. These variables are kept constant to ensure that any changes in the lava lamp's behavior are due to the manipulated variable being tested.
The size of the smallest lava lamp is 11.5 inch
Yes, you can use a fluorescent bulb in a floor lamp as long as the bulb fits the lamp's socket and wattage requirements. Make sure to check the lamp's specifications to ensure compatibility and consider the lighting quality and intensity of the fluorescent bulb for your needs.
Anywhere from $10-100 depending on size and how nice it is.
The dependent variable for lava lamps could be the rate at which the blobs move within the lamp when it is turned on, the time it takes for the blobs to rise and fall, or the size of the blobs as they flow throughout the lamp. These variables can be measured to observe the behavior and performance of the lava lamp.
To choose a 3-way 150 watt bulb for your lamp, check the lamp's maximum wattage rating, then select a 3-way bulb that does not exceed this wattage. Look for a bulb with the desired brightness levels and ensure it fits the lamp's socket size.
Yes, a type B bulb can be used in a touch lamp as long as it fits the lamp's socket size and wattage requirements. Make sure the bulb is compatible with the touch-sensitive mechanism and provides the desired brightness for the lamp.
A lava lamp experiment can last for several hours to a few days, depending on the size of the lamp, the quality of the materials used, and how well it is maintained. It is recommended to turn off the lamp after a few hours of use to prevent overheating and prolong its lifespan.
To choose the right 3-way light bulb for your lamp, check the wattage and size requirements of your lamp, then select a 3-way bulb that matches those specifications. Make sure the bulb is compatible with your lamp's socket type and consider the brightness levels you desire for different settings.
In 1963, a lava lamp typically cost around $20 to $25, which was considered quite expensive at the time. The lava lamp was a popular novelty item that gained popularity in the 1960s, known for its unique design and mesmerizing lava-like movement. The cost varied depending on the size and brand of the lamp, but the average price range was around $20-$25.