A wood fire can reach temperatures of around 1,100 degrees Celsius (2,012 degrees Fahrenheit) when burning.
The temperature of a fire produced from burning wood can vary, but typically ranges from 600 to 900 degrees Celsius (1,112 to 1,652 degrees Fahrenheit).
The optimal temperature for a wood fire to achieve the best results is typically between 700 to 900 degrees Fahrenheit. This temperature range allows for efficient burning of the wood and produces a clean, hot flame for cooking or heating purposes.
A wood fire can reach temperatures of up to 1,100 degrees Celsius (2,012 degrees Fahrenheit).
A wood fire typically reaches temperatures of around 1,100 to 1,200 degrees Fahrenheit.
The burning temperature of wood is typically around 600-900 degrees Celsius. This temperature is important because it is the point at which wood starts to break down and release flammable gases, which then ignite and sustain the combustion process. In simpler terms, the higher the burning temperature of wood, the easier it is for the wood to catch fire and continue burning.
The temperature of a fire produced from burning wood can vary, but typically ranges from 600 to 900 degrees Celsius (1,112 to 1,652 degrees Fahrenheit).
Trying to start a fire with damp wood is very difficult. When I backpack I always carry some tinder (dry shavings) to start a fire. Wet wood will not burn unless the fire is hot enough to evaporate the water that is in the wood. You can burn damp wood on an already burning fire but it will not burn as hot. Wet wood tends to smoke a lot and may go out on a small fire that does not have a good coal base. I have had to use damp wood to start a fire before but I had to shave down the wood until I found dry wood inside. Once you get a small fire started gradually add wood until you can get a hot fire. Too much wet wood at once can put out a fire. Not a good thing when you are cold and wet. Be patient.
A burning log can reach temperatures up to about 600-900 degrees Celsius (1112-1652 degrees Fahrenheit), depending on the type of wood and conditions of the fire.
Burning is an exothermic reaction.
The type of wood, and how hot the fire is burning. Incidentally, if you like colors, there are products that you can add to a fire that contain boron, barium etc, and produce colored flames.
Almost as hot as me.
You have to, or the fire is going to burn way too hot and not last very long. Depends on the type of wood you use also.
Lit a wood with a burning match
yes, if the wood is dry and the air is hot enough
the sun is as hot as burning fire
The optimal temperature for a wood fire to achieve the best results is typically between 700 to 900 degrees Fahrenheit. This temperature range allows for efficient burning of the wood and produces a clean, hot flame for cooking or heating purposes.
Hot enough to burn wood.