0
What else can I help you with?
If you break a magnet in half what happens to the magnetic poles?
If you break a magnet in half, each half gains a new pole. For example, you are holding a magnet in both hands with the north magnetic pole in your left hand and the south magnetic pole in your right hand. You break the magnet in half. The half that is in your left hand gains a new south magnetic pole and the half that is in your right hand gains a new north magnetic pole.
How could the same set of magnets exhibit both attraction and repulsion?
Magnets have two poles, north and south. When the north pole of one magnet is near the south pole of another magnet, they attract each other. However, when the same poles (north-north or south-south) are near each other, they repel. This is because of the magnetic field lines that flow between the poles, causing either attraction or repulsion depending on their orientation.
What are some ways of creating a permanent magnet?
One way to create a permanent magnet is by aligning magnetic domains in a ferromagnetic material by exposing it to a strong magnetic field and then cooling it to set the alignment. Another method involves rubbing a piece of iron or steel along a magnet to align the domains in the material and create a weak permanent magnet.
Is there any way to set up a magnetic field other then by causing the charges to move?
Yes, you can create a magnetic field by using a permanent magnet, such as a bar magnet or a magnet made from a ferromagnetic material. The alignment of the magnetic domains within the material produces a magnetic field without the need for charges to move.
Does stacking magnets make them stronger?
No, stacking magnets does not make them stronger. Magnets have a set strength based on their material and size, and stacking them does not increase this strength.
What kind of magnet has its strength and poles set by the manufacturer?
electromagnet
If you break a magnet in half what happens to the magnetic poles?
If you break a magnet in half, each half gains a new pole. For example, you are holding a magnet in both hands with the north magnetic pole in your left hand and the south magnetic pole in your right hand. You break the magnet in half. The half that is in your left hand gains a new south magnetic pole and the half that is in your right hand gains a new north magnetic pole.
Why are the poles of a magnet called N and S?
When a magnet is freely suspended at its center it will set itself along the north-south direction. The tip pointing towards the geographical north direction is called the north pole and the other tip is called the south pole.
How could the same set of magnets exhibit both attraction and repulsion?
Magnets have two poles, north and south. When the north pole of one magnet is near the south pole of another magnet, they attract each other. However, when the same poles (north-north or south-south) are near each other, they repel. This is because of the magnetic field lines that flow between the poles, causing either attraction or repulsion depending on their orientation.
What would happen to the magnetic field if the bar magnet were cut in half along the center line?
If a bar magnet is cut in half along the center line, each resulting piece would become its own magnet with its own set of north and south poles. The magnetic field around each piece would be similar to that of a single bar magnet.
What is the best way to properly set up a dome tent pole for maximum stability and support?
To properly set up a dome tent pole for maximum stability and support, follow these steps: Lay out the tent and assemble the poles according to the manufacturer's instructions. Insert the poles into the corresponding sleeves or clips on the tent. Secure the poles by attaching them to the tent's grommets or clips at the base. Adjust the tension of the poles to ensure they are taut and evenly distributed. Stake down the tent corners and guy lines for additional stability in windy conditions.
Is it possible to get a set of replacement tent poles for a Northern Design tent by Quest model samt 1408 because you let a scout troop borrow a tent for a camporee and it came home with no poles?
I called the manufacturer (Northern Designs 800-775-1965) and the tent is discontinued. Try www.polesforyou.com.
Increase magnet strength?
To increase magnet strength, you can use stronger magnetic materials such as neodymium magnets or increase the number of magnets in the set-up. You can also try magnetizing the material through techniques like stroking or using an electromagnetic coil to induce a magnetic field. Remember to handle strong magnets with caution, as they can be very powerful and may cause harm if mishandled.
How do you set the timing on a 1980 Yamaha yz 125?
To set the timing of a 80' yz125, look at the rotor magnet. On the edge of the magnet there should be marks, these are what you use to time the electrical sequence(time the spark). All you have to do is set the piston at top dead center and then align the mark on the magnet with the similar mark on the stator. To do this, you have to loosen the nut that retains the magnet, then tighten it when the marks are aligned properly.
How do you create a magnet?
The easiest way to create a magnet would be to get a piece of iron or other ferro-magnetic material and expose to a strong magnetic field. The strength of the resulting magnet would be directly proportional to both the strength of the original field and the period of exposure. Note that the newly magnetic metal will get weaker and weaker over time. This effect can be observed with refrigerator magnets and paper clips: if you put one of the clips on the magnet, it will then be able to pick up other clips for a short period of time, even when off the magnet.One way to create a magnet that doesn't get weaker with time is to make an electro-magnet: take a coil of wire and run an electric current through it. This set-up is called a solenoid, and the strength of the resulting field depends on the current and the number and density of loops in the coil. This field can also be strengthened by wrapping the coil around a bar of iron or other ferro-magnetic material.
How do you set up greatland 3 room tent?
green poles in front, black poles in the middle, blue poles in back..........hard to do without a manual, but trial and error prevails
How should you set the needle and seat in your carburetor?
Set it to exact manufacturer specifications.
