0
In theory yes, practically far as I know is no.
Though the force to pull liquid through siphon is gravity but atmosphere provide very important part as well. Atmosphere help push the liquid to surface, in this case, siphon tube wall. Without atmospheric pressure the liquid can only rely on its' surface tension and intermolecular force to keep pulling the liquid from higher reservoir in chain-like manner. It may help if the liquid had extra binding to the wall like Mercury on copper tube. Additional problem to concern if the liquid is too viscous, though it can form chain pulling effect but the viscosity itself will prevent the falling.
The atmospheric pressure help keep liquid in liquid phase. With zero pressure, either the liquid become gas by boiling or freeze from continue losing energy by evaporation process.
I think it would be very extremely impossibly hard to find such ideal fluid for siphon to work in vacuum.
What else can I help you with?
Why does the liquid move into the siphon when air is removed from the siphon by the pipette?
When air is removed from the siphon by the pipette, the atmospheric pressure pushes the liquid into the siphon to fill the vacuum created. This creates a pressure difference between the two ends of the siphon, causing the liquid to flow into it.
How do you create a vacuum on a siphon?
To create a vacuum on a siphon, you need to first fill the siphon tube completely with liquid before beginning the siphoning process. Then cover one end of the tube with your finger or a stopper, and quickly submerge the other end into the liquid source while keeping the tube sealed. Once the submerged end is in place, remove your finger or stopper from the other end to start the siphoning action. The vacuum will be created as the liquid starts flowing through the siphon due to gravity.
When will siphon will fail to work?
Siphons will fail to work when the liquid being transferred reaches a level equal to the highest point of the siphon. At this point, air will enter the tube, breaking the siphon effect and stopping the flow of liquid.
How does a bell siphon work to regulate water flow in an aquaponic system?
A bell siphon in an aquaponic system works by creating a vacuum that allows water to flow out of the grow bed once it reaches a certain level. When the water level rises, it fills the bell siphon tube, creating a siphon effect that quickly drains the water until the level drops below the siphon's opening. This cycle helps regulate the water flow in the system, preventing overflows and ensuring proper circulation for the plants and fish.
What does a siphon do?
A siphon is a tube that allows liquid to flow uphill without the need for pumping. By creating a vacuum within the tube, gravity helps pull the liquid up and over a barrier. This can be useful for transferring liquids between containers at different elevations.
Why does the liquid move into the siphon when air is removed from the siphon by the pipette?
When air is removed from the siphon by the pipette, the atmospheric pressure pushes the liquid into the siphon to fill the vacuum created. This creates a pressure difference between the two ends of the siphon, causing the liquid to flow into it.
How do you create a vacuum on a siphon?
To create a vacuum on a siphon, you need to first fill the siphon tube completely with liquid before beginning the siphoning process. Then cover one end of the tube with your finger or a stopper, and quickly submerge the other end into the liquid source while keeping the tube sealed. Once the submerged end is in place, remove your finger or stopper from the other end to start the siphoning action. The vacuum will be created as the liquid starts flowing through the siphon due to gravity.
When will siphon will fail to work?
Siphons will fail to work when the liquid being transferred reaches a level equal to the highest point of the siphon. At this point, air will enter the tube, breaking the siphon effect and stopping the flow of liquid.
How does a bell siphon work to regulate water flow in an aquaponic system?
A bell siphon in an aquaponic system works by creating a vacuum that allows water to flow out of the grow bed once it reaches a certain level. When the water level rises, it fills the bell siphon tube, creating a siphon effect that quickly drains the water until the level drops below the siphon's opening. This cycle helps regulate the water flow in the system, preventing overflows and ensuring proper circulation for the plants and fish.
Can you siphon water uphill?
No, you cannot siphon water uphill because gravity pulls the water downward, making it impossible for the siphon to work against gravity.
How does a syphon brake work?
A syphon brake is a device used in certain types of siphoning systems to control the flow of liquid. It works by creating a vacuum that prevents liquid from flowing back into the source when the siphon is not in use. When the syphon is activated, the brake is released, allowing gravity to pull the liquid through the siphon. This mechanism helps maintain a consistent flow and prevents spills or backflow when the siphon is disengaged.
How do you siphon gas out of 1998 Chevy Silverado?
Super Siphon kit available at auto parts should work,
What does a siphon do?
A siphon is a tube that allows liquid to flow uphill without the need for pumping. By creating a vacuum within the tube, gravity helps pull the liquid up and over a barrier. This can be useful for transferring liquids between containers at different elevations.
What is the difference between siphon breaker and vacuum breaker?
A vacuum breaker does not allow back flow into the potable water system A syphon breaker is normallly installed on a tank that there is a possibility of the tank imploding
How do you get the gas out of the car?
Siphon it out of the tank. Feed a hose into the gas take and create a vacuum to remove the gas. Have tank or bucket ready.
A simple device for moving liquids over obstacles without a pump?
One simple device to move liquids over obstacles without a pump is a siphon. A siphon works by creating a vacuum that pulls the liquid up and over the obstacle, allowing it to flow continuously. Simply fill the siphon tube with liquid, ensuring the end of the tube is lower than the liquid source, and gravity will do the rest.
How do you use siphon kit on s10 gas tank?
To use a siphon kit on an S10 gas tank, first ensure that the vehicle is off and parked on a level surface. Attach the siphon hose to the siphon pump and insert the other end into the gas tank through the filler neck. Pump the siphon to create a vacuum, allowing the fuel to flow into your container. Monitor the process to avoid overfilling your container and ensure safety precautions are followed due to the flammable nature of gasoline.
