The quick and short answer to this question is "yes". It's all based on how well the glass is manufactured. There is a large amount of heat used during the manufacturing process of laminated or toughened glass which temporarily weakens it. The glass is heated to a melting point for which it can be reshaped and then cooled quickly to hold the new shape. It is during this process that the laminated glass is at its' most vulnerable point and needs to be handled with precision until it has cooled. Improper alignment of the rollers which are used during the reshaping and cooling process are generally the cause of these small waves or lines in the glass. These waves and lines are not indicative of poor quality and are not considered defects in the glass. However, if the waves are so apparent that images appear overly distorted then a new replacement glass should be requested.
This post was made by www.autoglasslocator.com
On average, 3mm toughened glass weighs approximately 7.5 kg per square meter.
The density of laminated glass typically ranges from 2.47 to 2.55 grams per cubic centimeter (g/cm³), depending on the specific configuration and materials used in its construction.
On average, 10mm thick toughened glass weighs approximately 7.5 kg per square meter. The weight may vary slightly depending on the specific type and manufacturing process of the glass.
Toughened glass is transparent, allowing light to pass through. It is specifically designed to be stronger and more impact resistant than regular glass, making it a popular choice for applications where safety and durability are important.
Laminated glass was invented by Libby-Owens-Ford. It was made for the auto industry
Normal float glass is toughened and the two pieces of toughened glasses stuck together with a multilayer PVB in between (lamination), to make bullet proof glass. Refer: http://theglassblog.wordpress.com/tag/glass-tempering/ https://theglassblog.wordpress.com/tag/laminated-glass/
Tempered glass can be laminated, but laminated glass cannot be tempered.
Toughened or laminated EDIT: Laminated, annealed glass for the windshield. It will be held to gether by the plastic if broken, and not break into shards to cut the driver and passenger. The other windows are tempered, and break into small cubes that don't cut. Classic cars, like '57s chevys, have laminated glass thoughout. Antique cars , like Model T's, had simple plate glass, it caused serious cuts in an accident
The material for most bus windows is toughened glassThe material for most bus windows is toughened glass
1dollar
Shoot it, look at the effects to the glass.
Laminated glass is produced by bonding two or more layers of ordinary annealed glass together with a plastic interlayer, usually polyvinyl butyral (PVB). The PVB is sandwiched by the glass which is passed through rollers to expel any air pockets and form the initial bond then heated to around 70
On average, 3mm toughened glass weighs approximately 7.5 kg per square meter.
Standard toughened glass is class 0
Laminated glass and tempered glass are not necessarily the same thing. Tempered glass cannot be drilled, but untempered laminated glass could (probably) be drilled. Holes in tempered glass are drilled before tempering.
gorilla glass is a toughened glass, developed by Corning, especially for use in touchscreen applications
Toughened glass cannot be cut after it has been processed, as it will shatter into small pieces if any attempt is made to cut it. The toughening process puts the glass under high surface compression, making it resistant to cutting.