0
The amperage rating (800 mA) of a wall power transformer/converter is simply the maximum current that the unit can supply, so the 300 mA device will only pull 300. It's okay to use the 800 mA rating. On the other hand, the device requires 6 V, and the transformer is rated for 5 V. Most of these Transformers will give slightly more voltage than they are rated, but don't count on it. It might work and it might not, but it isn't dangerous.
On the other hand, you shouldn't use a transformer with higher voltage unless you are willing to risk damaging the device.
Of highest importance is to make sure the + and - polarity of the transformer and the device are the same as each other.
What else can I help you with?
What would happen if you used a 600mA adaptor instead of a 500mA?
Using a 600mA adaptor instead of a 500mA one could potentially supply more current to the device than it is designed for. Depending on the device's circuitry, this can lead to overheating and damage, especially if the device is not designed to handle the extra current. It's generally safer to use an adaptor with the recommended current rating for the device.
How many watts does a hair curler use?
A typical hair curler uses between 30-60 watts of power, depending on the brand and model. Make sure to check the specific wattage listed on the device or its manual for an accurate measurement.
Can you use 5cV DC 800mA adapter in place of 6 V DC 300 mA adapter?
No, you should not use a 5V DC 800mA adapter in place of a 6V DC 300mA adapter. The output voltage and current ratings of the adapter need to match those required by the device you are powering. Using an adapter with lower voltage or significantly higher current may damage the device. It's best to use an adapter that matches the specified requirements.
A device that makes energy easier is a machine?
A device that makes energy easier to use could be a power converter or energy transformer that changes the form of energy (such as from mechanical to electrical) for more efficient use.
What tool would you use to determine if an object is charged?
To determine if an object is charged, you can use a device called an electroscope.
Can you use an AC adaptor - 3v dc 800 ma to replace AC adaptor - 9 v DC 250 ma?
no, must be 3v
Can you use a 9v 300mA adapter on a 9v 200mA device?
No. The adaptor will overheat.
Can you use a 12v 1a adaptor for a 800ma?
Yes, 1 amp is equal to 1000ma and it will be able to operate a 850 ma device.
How can you access Android device by a Macbook Air?
Yes. You can either access that Android device via a micro USB to USB adaptor, or use an app such as AirDroid (doesn't require an adaptor) to connect/sync.
What would happen if you used a 600mA adaptor instead of a 500mA?
Using a 600mA adaptor instead of a 500mA one could potentially supply more current to the device than it is designed for. Depending on the device's circuitry, this can lead to overheating and damage, especially if the device is not designed to handle the extra current. It's generally safer to use an adaptor with the recommended current rating for the device.
Can you use an AC adaptor - 6v dc 1300 ma to replace AC adaptor - 6 v DC 800 ma?
Yes you can. All the 1300 mA rating means is that adaptor can supply devices up to 1300 mA. The old adaptor's limit was 800 mA. The new adapter has 500 mA more in reserve if it is ever needed.
What is the best way to transfer data from an SD card to a CompactFlash card using an adaptor?
To transfer data from an SD card to a CompactFlash card using an adaptor, insert the SD card into the adaptor and then insert the adaptor into the CompactFlash card slot on your device. Use a computer or device with both SD and CompactFlash card slots to copy and paste the files from the SD card to the CompactFlash card.
Can you use a AC-adapter with the input of 230V 50Hz on an electronic device that originally came with an AC-adapter that had an input of 120V 60Hz or would that fry it?
Pretty certainly no; it depends slightly on the type of adaptor - if it's regulated then you'll probably destroy the adaptor and maybe the device it's plugged unto, if it's unregulated then you'll probably destroy the device and maybe the adaptor.
Can you use a 12 VDC 2A adaptor on a 12 VDC 1A device?
Yes, there will be no problem with this adapter. The 1 amp device will only be drawing half of what the adapter can produce.
Can you use an AC adaptor with 9v output and plug it into a device that has 5v input?
No the voltage gap is too wide. If the higher voltage is used there is the possibility that the connected device might be destroyed.
Is it ok to use a 5v 1A AC adapter for a device when the original adapter is supposed to be 5V 500mA - will it damage the device?
Yes - what matters is the voltage - it has to be the same. The device will only draws 1A as needed - the adaptor with higher amp,i.e, 2A is fine. As long as the adaptor has amps equal to or greater than those of the device, it will be ok!
Can you use a 12 v 1000 ma AC adaptor instead of 12 v 700 ma AC adaptor?
Yes, the 1000 mA has more that enough capacity to operate a 700 mA device. If the 700 ma adapter was original equipment with the device it was to charge, then the device is more than likely drawing about 500 to 600 mA. Look on the device's nameplate and you should see the mA draw.
