to peform this conversion you need to know the density of the material (SG-Specific Gravity).
Once you have this you multiply the tonnes by the SG
To convert ton miles to megajoules, you would need to know the efficiency of the conversion process. Without this information, it is not possible to provide an accurate conversion.
There can be no conversion.A ton is a measure of mass. A cubic metre is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
36 Tons = 72,000 Pounds There are three types of ton Long ton = 2240 lbs Metric ton = 2204.6 lbs Short ton = 2000 lbs Multiply by whichever ton you are using. The metric ton is usually spelled "tonne"
There are 14.9 short tons in 29,800 pounds. This conversion is based on the fact that 1 short ton is equal to 2,000 pounds.
0.6 ton 1 US (short) ton = 2000 lb 1 UK (long) ton = 2240 lb 1 tonne (metric) = 2204.6 lb
3
Conversion: Naptha is 0.75 g / cc or 1.333 cc/g Conversion: 1000 cc = 1 l Conversion: 453.59237 g = 1 pound. Conversion: 2000 pounds = 1 ton 1 ton * 2000 lb/ton * 453.59237 g/lb * 1.333 cc/g * 0.001 l/cc = 1209.579653 liters.
Standard conversion rate is 1 ton equals 2000 pounds, so 3 tons is 6000 pounds. There are other definitions for the ton, Metric ton, Long ton, but when talking about weight in pounds the standard conversion is usually used.
Use a density factor to make a barrel to ton conversion. The ton is a metric weight and the barrel is a volume measurement.
To convert ton miles to megajoules, you would need to know the efficiency of the conversion process. Without this information, it is not possible to provide an accurate conversion.
Corn silage is typically measured in tons rather than bushels, but if you need to make a conversion, one ton of corn silage is roughly equivalent to about 8 to 10 bushels of corn. The exact conversion can vary depending on the moisture content and the specific type of corn. Generally, the conversion factor used is about 9 bushels per ton.
It does not have a BCM.
One ton of cooling is about 12,000 Btu/h one Btu/h is 0.293 watt so...One ton = 3.516 Kilowatts
The formula used to convert tons to metric tons 1 t * 1 metrictons 1.1023 t = 0.90718474 metrictons
kl means kiloliter, this is a unit of volume. A ton is a unit of mass. There is no standard conversion from one to the other.
One ton of cooling is about 12,000 Btu/h one Btu/h is 0.293 watt so...One ton = 3.516 Kilowatts
BCM's parent company is Taylor.