ISO VG 46 Oil has a density of 847.9 kg/cubic meter at 58.5 degree C & 856 kg/cubic meter at 45 deg C.
It depends on the density of the object and the density of the oil. If the object has a higher density than the oil, it will sink. If the object has a lower density than the oil, it will float.
Because eggs have a lower density than oil! Density is the mass divided by volume.
The same way you convert any density to specific gravity. Just divide the density of the substance (crude oil in this case) by the density of the reference substance (usually water, for liquids).
If the density of the ball bearing is less than the density of the given oil, the ball bearing will float in the oil since objects with lower density float on substances with higher density. The buoyant force acting on the ball bearing will be greater than its weight, causing it to rise to the surface of the oil.
Oil has a medium density because it is a mixture of various hydrocarbons with different molecular weights. This mixture gives oil an average density between light and heavy hydrocarbons, making it fall in the medium density range.
what is the density of castre oil what is the density of castre oil
Equivalent d 'huile iso vc 150/220
It depends on the density of the object and the density of the oil. If the object has a higher density than the oil, it will sink. If the object has a lower density than the oil, it will float.
no iso 100 is same as 40 non detergent
The density of oil is 820 kg/m3.
Because eggs have a lower density than oil! Density is the mass divided by volume.
Oil floats on water, and has a lower density.
i made this mistake on an hydraulic breaker pack,no damage was caused to the pump or breaker.however the operation of the equipment was sluggish until the machine really warmed up.presumably because the 46 oil is" thicker" than the iso 32
You can if the manufacture recommends that particular weight of oil.
Any name brand PAO gear oil with a base oil viscosity of ISO 150
According to the technical department at Warren Oil Company, manufacturer of Coastal Multitrack Tractor Fluid, ISO 68 is 20 weight oil. They further stated that most hydraulics in farm tractors operates on 20 weight oil.
The oil with the greatest density is a motor oil with a high viscosity, which is a resistance to flow. A lower density oil would be one that is like SAE 20.