answersLogoWhite

0

No, a fluorescent light fitting with a 4xT8 2' 18W tube and a 48W ballast does not use all the 120W when running.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Physics

Why does fluorescent light hum flicker?

Fluorescent lights may hum due to the vibration of the internal components, such as the ballast or the bulbs. Flickering can be caused by a faulty starter or ballast, inadequate power supply, or aging bulbs. Regular maintenance and replacing faulty parts can help reduce these issues.


What does the ballast do in a fluorescent light?

Electronic Ballast plays a important part in lights.We need a Ballast Tester to test the electronic ballast performance of a fluorescent light fixture. This is a basic process that can be accomplished quickly once you understand the operation of the high voltage transformer. The high voltage transformer is also encased in an oil bath that reduces the heat created by the action of the transformer. A low voltage, generally 120 VAC, is transformed into a high voltage, generally in thousands of volts. There must be a continuity between the wires of the high voltage side in order for the circuit to operate correctly. Heat can damaged the internal connections of the ballast. By using a volt ohmmeter the internal circuit can be quickly checked. Not only in the voltage, but also in the current and others factors. If you want to learn more details about electronic ballast and relevant instruments, see the related link.


What is TCT florecent light?

TCT fluorescent light refers to a type of compact fluorescent lamp specifically designed for electronic ballast operation. These lamps are energy-efficient and have a higher color rendering index compared to traditional fluorescent lamps. TCT lamps are commonly used in commercial and industrial settings where high-quality lighting is required.


What does the ballast do in a fluorescent light fixture?

Electronic Ballast plays a important part in lights.We need a Ballast Tester to test the electronic ballast performance of a fluorescent light fixture. This is a basic process that can be accomplished quickly once you understand the operation of the high voltage transformer. The high voltage transformer is also encased in an oil bath that reduces the heat created by the action of the transformer. A low voltage, generally 120 VAC, is transformed into a high voltage, generally in thousands of volts. There must be a continuity between the wires of the high voltage side in order for the circuit to operate correctly. Heat can damaged the internal connections of the ballast. By using a volt ohmmeter the internal circuit can be quickly checked. Not only in the voltage, but also in the current and others factors. If you want to learn more details about electronic ballast and relevant instruments, see the related link.


What the difference between ballast and transformer?

A transformer changes the amperage and / or voltage. It literally "Transforms" electrical energy. A ballast is like a capacitor. Think of a ballast as a short-term battery. It stores power then releases it as needed. A common example of a ballast is on fluorescent lights. Initially, a fluorescent light needs a big blast of energy to excite the gas molecules into emitting photons (light). Then it only needs a small amount of energy to keep the gas molecules in an excited state. However, that power has to be of consistent amperage and voltage. The ballast is designed to do that. The electrical ballast stores energy in the same way that a water ballast stores water for stability. Because the electrical ballast stores far more power than the device it regulates requires, it too provides a kind of electrical stability. That's why you often see a fluorescent light flicker or "lose stability" when the ballast starts to go bad. A transformer transforms voltage and amperage up or down. A ballast provides a stabile power supply.

Related Questions

Does a ballast use electricity if no bulbs are present?

If you mean the ballast in a fluorescent light fitting where the ballast is wired in series with the tube, the answer is "No". Explanation: If no tube is in place, the light fitting's circuit is "open" so there is nothing to take any current from the "hot" supply wire and return it to the "neutral" wire.


The lagalities regarding modifying a fluorescent light batten holder for fitting a led light t8 tubeI will be bridging the ballast and removing the starterI am a competent person1?

No. You are not.


If the ballast on a fluorescent light blows will the lamp still work?

Typically, if the ballast on a fluorescent light blows, the lamp will not work. The ballast regulates the electrical current to the lamp, so if it is not functioning properly, the lamp will not receive the correct power to light up.


What is the purpose of a fluorescent light ballast and how does it function in the operation of fluorescent lighting systems?

The purpose of a fluorescent light ballast is to regulate the electrical current flowing through the fluorescent light tubes. It provides the initial surge of electricity needed to start the light and then regulates the current to keep the light glowing steadily. The ballast also helps prevent flickering and ensures the longevity of the fluorescent tubes.


Why does fluorescent light flicker?

Fluorescent lights flicker because they rely on a ballast to regulate the flow of electricity. If the ballast is faulty or the light bulb is reaching the end of its lifespan, it can cause the light to flicker.


What is the purpose of the ballast in a fluorescent light fixture?

The purpose of the ballast in a fluorescent light fixture is to regulate the electrical current flowing through the light bulb, ensuring that it operates efficiently and produces steady light output.


How can I change a ballast in a fluorescent light?

To change a ballast in a fluorescent light, first turn off the power to the light fixture. Remove the cover and locate the ballast. Disconnect the wires and remove the old ballast. Install the new ballast in the same position and reconnect the wires. Finally, replace the cover and turn the power back on.


How does a fluorescent light fitting operate?

mercury


How does 4 tube fluorescent work?

A 4-tube fluorescent light contains four fluorescent tubes connected to a ballast that regulates the electrical current flowing through the tubes. When the light switch is turned on, the ballast sends high voltage to the tubes to ionize the gas inside. This ionization process produces ultraviolet light, which then interacts with the phosphor coating inside each tube to produce visible light.


Why is my fluorescent light not working?

Your fluorescent light may not be working due to a faulty bulb, a problem with the ballast, or issues with the electrical connection.


What is the purpose of a ballast in a fluorescent lighting system?

The purpose of a ballast in a fluorescent lighting system is to regulate the electrical current flowing through the fluorescent tube, ensuring that it operates efficiently and produces a steady light output.


What is the process for t12 ballast replacement in a fluorescent light fixture?

To replace a t12 ballast in a fluorescent light fixture, first turn off the power to the fixture. Remove the cover and locate the ballast. Disconnect the wires and remove the old ballast. Install the new ballast, reconnect the wires, and replace the cover. Turn the power back on and test the light to ensure it is working properly.