No, the density of iron is fairly high.
The density of iron ore is variable. Iron ore refers to a rocktype that contains iron minerals. The type and concentration of the iron minerals as well the type and concentration of non-iron minerals determines the density of the iron ore. Typical high grade iron ore is approximately 65% hematite and 35% other (commonly silicate). The density of hematite is approximately 5 g/cc and a general density for crustal rocks (silicates) is approximately 2.67 g/cc. Therefore iron ore that is 65% hematite and 35% silicate would have a density of approximately 4 g/cc.
That depends on how much gargo it's carrying. But if it's floating, then its density is less than 1.0 .
Iron has a density of approximately 7.86g/cm3. Nails are not usually made from pure iron, but from soft steel, a mixture of iron and carbon. The density, however, is pretty much the same depending on the grade of steel used.
High volume and low mass result in low density because density is calculated by dividing mass by volume. When the mass is low compared to the volume, the density will also be low because there is less mass per unit of volume.
No, even if the density of the iron is less than water, the density of the iron box as a whole would still be greater than water, making it sink. Density is determined by the total mass of an object divided by its total volume, not just the material it is made of.
The planet with the lowest overall density is Saturn.
The density of Galvanized Iron is 7850 kg/m3. Density of steel is equal to the density of galvanized iron
Iron
Iron is more dense than silicon.
Iron has a greater density.
A block of iron will float in mercury due to the higher density of iron compared to mercury. In water, the iron block will sink because the density of iron is higher than that of water. The buoyant force acting on the iron block is determined by the density of the surrounding fluid.
Copper has a density of 8.9 g/cm3 while iron has a density of 7.9 g/cm3. Therefore copper is denser than iron.
if they are both made of iron and no other impurities the density is the same
The Density of Low Grade SteelThe density of low grade steel is on the order of 7850 kg/m3, 78.5 kN/m3, 7.85 g/cc or 0.2836 lb/in3.
No. That's the beauty of "density". It's a characteristic of the substance, and the size of the sample has no effect on it. As long as the sample is pure, a pinhead of it has the same density as a truckload of it.
No, cotton has a density of 1.54-1.56 g/cm³ while iron has a density of 7.874 g/cm³
Iron.