0
What else can I help you with?
How many psi in 29.92 in hg.?
29.92 inches of mercury, which is the average atmospheric pressure on Earth at sea level, is about 14.7 pounds per square inch.
What is the conversion factor from pascal to psi?
The conversion factor from pascal to psi is 1 pascal is equal to 0.00014503773773 psi.
What is the conversion factor from 1 pascal to psi?
The conversion factor from 1 pascal to psi is approximately 0.00014503773773.
What is the conversion factor from pascals to pounds per square inch (psi)?
The conversion factor from pascals to pounds per square inch (psi) is 1 pascal 0.00014503773773 psi.
How to convert 70 psi to kg cm2?
Use this formula: psi x 0.07031 = kg/cm270 psi x 0.07031 = about 4.921 kg/cm2
Conversion of psi to kpa?
Formula: psi x 6.895 = kPa
160 psi equals what compression ratio?
To convert pressure in psi to a compression ratio, you typically need to know the ambient atmospheric pressure, which is approximately 14.7 psi at sea level. The compression ratio can be calculated using the formula: Compression Ratio = (Absolute Pressure inside the cylinder + Atmospheric Pressure) / Atmospheric Pressure. Therefore, 160 psi would yield a compression ratio of approximately 12.9:1 when accounting for atmospheric pressure.
How many psi in 29.92 in hg.?
29.92 inches of mercury, which is the average atmospheric pressure on Earth at sea level, is about 14.7 pounds per square inch.
What is the conversion factor from pascal to psi?
The conversion factor from pascal to psi is 1 pascal is equal to 0.00014503773773 psi.
What is the formula to convert psi to milliamps?
To convert psi (pounds per square inch) to milliamps, you typically need a specific calibration curve or conversion factor that relates pressure to current for a given sensor, as the conversion is not direct. For example, if a pressure sensor outputs 4-20 mA for a range of 0-100 psi, you can use the formula: [ \text{mA} = \left( \frac{\text{psi}}{\text{max psi}} \times 16 \right) + 4 ] This means you first calculate the proportion of psi to the maximum psi, multiply by 16, and then add 4 to get the output in milliamps. Always refer to the specific sensor's documentation for accurate conversion.
Convert PSI into atmmospheric pressure?
To convert PSI (pounds per square inch) into atmospheric pressure (atm), you can use the conversion factor: 1 atm is approximately equal to 14.7 PSI. To convert PSI to atm, divide the pressure value in PSI by 14.7. For example, if you have 29.4 PSI, it would be approximately 2 atm (29.4 ÷ 14.7 = 2).
If the psi of a amc 360 engine is 155. What is the compression ratio?
To determine the compression ratio from the psi (pounds per square inch) reading of an engine, you typically need additional information, such as the specifications of the engine, including the displacement and the type of gauge used for the psi measurement. However, a common method is to use the formula: Compression Ratio (CR) = (Absolute Pressure in Cylinder + Atmospheric Pressure) / Atmospheric Pressure. For example, if the atmospheric pressure is approximately 14.7 psi, the absolute pressure would be 155 psi + 14.7 psi = 169.7 psi, leading to a rough compression ratio of about 12.5:1.
What is the conversion factor from 1 pascal to psi?
The conversion factor from 1 pascal to psi is approximately 0.00014503773773.
What is the total pressure on a diver at 99 feet below the surface how many units?
At 99 feet below the surface, the total pressure on a diver can be calculated using the formula: total pressure = atmospheric pressure + (depth in feet × 0.433 psi/ft). The atmospheric pressure at sea level is approximately 14.7 psi. Thus, the total pressure at 99 feet is about 14.7 psi + (99 ft × 0.433 psi/ft) = approximately 14.7 psi + 42.8 psi = 57.5 psi. Therefore, the total pressure on a diver at that depth is approximately 57.5 psi.
How do you convert a differential pressure of 43 psi to absolute units?
To convert the differential pressure of 43 psi to absolute pressure, you would add the atmospheric pressure to the differential pressure. On average, atmospheric pressure at sea level is about 14.7 psi. So, adding 43 psi to 14.7 psi gives an absolute pressure of approximately 57.7 psi.
What is the conversion KSI to PSI?
1 ksi is equal to 1,000 psi
What is the conversion factor from pascals to pounds per square inch (psi)?
The conversion factor from pascals to pounds per square inch (psi) is 1 pascal 0.00014503773773 psi.
