To fill a container that can hold 100 litres, you would need 100 litres of water.
As illustrated in the 1995 movie Die Hard 3 (Bruce Willis, Samuel K. Jackson), you can measure out exactly 7 liters in the following manner:Fill the 5 liter container, then use that 5 liters to fill the 3 liter container.Dump out the 3 liter container.What was left in the 5 gallon container is 2 liters. Pour this into the 3 liter container.Fill the 5 liter container again.You now have 7 liters : 5 in the large container and 2 in the smaller one.
the average bath takes 225 litres to fill.
To efficiently fill water into a container, use a funnel to direct the water flow and prevent spills. Position the container on a stable surface and pour the water slowly to avoid splashing. Consider using a measuring cup or pitcher for more precise pouring.
You would use a measuring cup or a graduated cylinder to measure the capacity of a container. Fill the container with water and then pour the water into the measuring cup or graduated cylinder to determine its volume.
Fill a container with water. Submerge the object in the water, making sure it is fully immersed. Collect the water that is displaced by the object in a separate container. Measure the volume of this displaced water, which is equal to the volume of the object.
16 halfpint cartons of water are needed to fill the gallon container
343 litres.
you need to drop your container (#1) into another larger container (#2) floating in a container of water (#3). Mark the water level in container #3 remove container #1 from #2. Fill container #3 back to the marked level measuring the number of litres used. Divide the number of litres used by a 1000 and you have the weight in metric tonnes
Fill up the 5 litres and empty. Do this again and you have 10 litres. Then fill the 5 litres, then fill the 4 litres from the 5 litres, and you're left with the final 1 that you needed to complete the 11 litres
About 200 litres to fill a bath.
If you fill the container up then Yes. Litres are a measure of volume, which remains the same regardless of what fluid or material you are describing.
13520576 cubic metres = 13520576000 litres.
Fill a large container to the brim with water, immerse the person to be measured in it completely. collect/catch allthe water that comes out of the container. Measure this volume of water in litres and however many litres you have time by 1000 cubic centimetres per litre is the volume of your person.
As illustrated in the 1995 movie Die Hard 3 (Bruce Willis, Samuel K. Jackson), you can measure out exactly 7 liters in the following manner:Fill the 5 liter container, then use that 5 liters to fill the 3 liter container.Dump out the 3 liter container.What was left in the 5 gallon container is 2 liters. Pour this into the 3 liter container.Fill the 5 liter container again.You now have 7 liters : 5 in the large container and 2 in the smaller one.
Several ways to achieve this - here is one solution. Fill the 5 litre container and pour it all into the 9 litre container. Fill the 5 litre container and pour it into the 9 litre container until the latter is full - leaving 1 litre in the 5 litre container. Empty the 9 litre container. Fill the 3 litre container and empty into 9 litre container. Repeat. There are now 6 litres in the 9 litre container. Pour the 1 litre from the 5 litre container into the 9 litre container which now contains 7 litres.
Two litres of water might fill a fish bowl.
Fill the 5 litre container and empty it into the 9 litre one. Fill the 5 litre (again) and empty 4 litres into the 9 litre container. Now - empty the remaining litre into the 6 litre container. Finally re-fill the 5 litre container and empty into the 6 litre one - and you're done.