The amount of energy used can be calculated by multiplying power x time:
energy = power x time
Since you normally pay the electricity used by the kilowatt-hour, it makes sense to convert the power rating to kilowatts. If it is specified in watts, divide that by 1000 to convert to kilowatts. Then multiply by the number of hours of use. For example: for a device that uses 100 watts, and which you turn on for 5 hours, your calculation would be:
0.1 kilowatt x 5 hours = 0.5 kilowatt-hours
On some devices, watts are not specified. In that case, multiplying volts x amperes is usually close to the number of watts used.
If I understood your question correctly, 'If you know the power rating of an appliance and the voltage of the line it is attached to, can you calculate the current used by the appliance?' You are looking for this equation: I = Current (Amps) P = Power Rating (Watts) V = Voltage (Volts) I = P/V This equation is useful when calculating the fuse rating for an appliance. For example, and appliance rated at 2400 watts, supplied with 240 volts has a 10 amp maximum. I = 2400/240 however, when it comes to paying for electricity, the energy is measured in units, which can be found using the equation: P = Power (kW) t = Time (Hours) Energy Used (Units) = Pt for example, an appliance rated at 2 kW used for 3 hours, uses 6 units of energy. Units = 2*3
electricity
Power plants generate electricity and the electricity is used just like any other energy source would be, they power cities and make stuff run
Nuclear power is used to generate electricity.
Wind power generates electricity, just like coal, water and solar power generate electricity. Electricity is a key utility in modern life, nearly everywhere in the world.
It is the energy efficiency rating. The higher the no. of stars the less electricity or power is used making the fridge more efficient.
maths is used to calculate the units of electricity consumed by the user....
Electricity from solar power is the same as electricity from a coal-burning power plant. It's all the same, and it can be used to power anything that runs on electricity.
If I understood your question correctly, 'If you know the power rating of an appliance and the voltage of the line it is attached to, can you calculate the current used by the appliance?' You are looking for this equation: I = Current (Amps) P = Power Rating (Watts) V = Voltage (Volts) I = P/V This equation is useful when calculating the fuse rating for an appliance. For example, and appliance rated at 2400 watts, supplied with 240 volts has a 10 amp maximum. I = 2400/240 however, when it comes to paying for electricity, the energy is measured in units, which can be found using the equation: P = Power (kW) t = Time (Hours) Energy Used (Units) = Pt for example, an appliance rated at 2 kW used for 3 hours, uses 6 units of energy. Units = 2*3
There are several equations for power. For example, the definition of power: P = work/time Specifically for electricity, the following equations are often used: P = I2R P = V2/R
Electricity was used to power high-tech objects and automobiles such as cars electricity was used to also power light and light bulbs
power generators or nuclear power can be used to make electricity
It depends on the power rating of the saw. If it is a 1 KW (Kilowatt) saw then it will use 1 KWH (Kilowatt hour) of electricity for every hour it is used. This is equivalent to 1 unit of electricity. If it is 500 W (Watt) then it will use half this. If it is 2 KW it will use double this.
electricity
it is a more efficient way to calculate the costs of electricity being used in the home, it breaks up each use power being used
Nuclear Power is used in power stations to produce electricity
It is used to power your electricity and is the only thing that can power electricity. It also powers some calculators, lights, and other small devices.