0
Voltage is a property of electrical potential. Amperes (and miliamperes) are the units of electrical current. Even though these are related to each other in a circuit, they are not the same thing, and they cannot be "converted" into each other.
Also, these properties are only related through a "load" the circuit provides (the resistance and inductance of the circuit), and make sense only when related to each other this way. If there is current, there will be voltage as well, but if there's only voltage, there will be no current unless there is some resistance as well (even a wire has resistance) - otherwise the circuit is "open" and no charge is flowing.
In a simple circuit with a voltage source and resistor:
milliamps = voltage*1000/resistance.
If your circuit has diodes, capacitors, inductors, etc. it gets much more complicated.
What else can I help you with?
How many amps to a kilowatt?
The relationship between amps and kilowatts depends on the voltage of the circuit. To calculate the amperage for a given kilowatt value, you need to know the voltage as well. The formula to convert kilowatts to amps is Amps = (kW * 1000) / Volts.
How do you convert Mega Joules to Joules?
You can't convert them directly, because they measure different things. The unit for energy is the Joule. Power means how fast energy is transferred; it is measured in Joules/second, also called Watts.
How much current in amps flows through a circuit with a 100 resistance?
You don't have enough information in your question, you need to include the voltage as well. One relevant equation is V = I * R where V: Voltage, I: Amps, and R: Resistance. When you have the voltage divide the Ohm resistance into that and you'll get your amps.
120 volts equals how many amps?
There is no conversion. They measure different things. It's like asking 120 miles equals how many pounds? Voltage is also called electric potential. In a water analogy it's like pressure. Amperage is also called electric current. In a water analogy it's like flow rate.
If a current of 2 amps flows through a 12 ohm resistor what is the voltage across the resistor?
V = (I) x (R) = 2 x 12 = 24 volts
How many KVA is 62 amps?
At what voltage? When you know the voltage then, to get the amps those kilovolt-amps contain, you simply divide the kilovolt-amps by the voltage.
How do you convert HV amps to LV amps?
To convert high voltage (HV) amps to low voltage (LV) amps, you can use the formula: HV amps = LV amps x (LV voltage / HV voltage). By rearranging the formula, you can calculate LV amps by dividing HV amps by the ratio of HV voltage to LV voltage.
Convert 1000 ohms to amps?
Can not do it without knowing the voltage I = E/R. Amps = Voltage/Ohms.
Convert 38milliamps to amps?
Milli = 1/1000. This is all the info that you should need.
37.5 amps converted in watts?
To convert amps to watts, you also need the voltage. The formula to calculate power in watts is Watts = Amps x Volts. If the voltage is 120V, then 37.5A would be equivalent to 4500W (37.5A x 120V = 4500W).
How many amps to a kilowatt?
The relationship between amps and kilowatts depends on the voltage of the circuit. To calculate the amperage for a given kilowatt value, you need to know the voltage as well. The formula to convert kilowatts to amps is Amps = (kW * 1000) / Volts.
40 milli amps per minute for a total of ten minutes?
400 milli amps total.
How many amps is 11kw?
To convert kilowatts to amps, you need to know the voltage of the circuit you are calculating for. Assuming a standard voltage of 240V, 11kW would be approximately 45.8 amps.
What is 0.011 in converting watts to amperes?
To convert watts to amps a voltage value must be given. Amps = Watts/Volts. Amps = .011/Volts.
How many amps are a watt?
No.By which I mean: amps and watts are not just different units, they're different TYPES of units. You can't convert amps to watts without knowing the voltage (if you DO know the voltage, multiply volts by amps to get watts).
300kva equals amps?
To convert kVA to amps, you need to also know the voltage. If we assume a standard voltage of 480V, then 300 kVA would be approximately 360 amps. This is calculated by dividing the kVA by the voltage and then converting to amps using the formula: Amps = (kVA * 1000) / (1.732 * Volts) where 1.732 is the square root of 3.
How do you convert 5kw and 120 voltage to amps?
5000w / 120 volts = 41.66 amps P=E*I transposed to I=P/E
