First you spelt dielectric wrong.---boo
second there is a method of spreading ,it uses glitter polymers to act as reflectors ,but it just matters what substance you are refering too.
It causes light to slow down significantly.
High energy light has a small wavelength, and a high frequency.
The speed of light in a vacuum, called c (celerity) is a constant at 300 000 km/sec. In another material, it will be significantly slower. Perhaps as low as 0.5. These 'high refractive glasses' are of immense value in optics and lanthanum is one of the rare earths that are used. Seldom does the refractive index exceed 2.0 however. The speed of light in a vacuum is taken as 1.0 (by definition), and the refractive index is the (speed of light in vacuo) / (speed of light in the substance). Organic liquids have values greater than 2.0, and are used with cover glasses in microscopy - the 'oil immersion lens' application.
Heat
A light bulb works by passing an electric current through the filament, which is usually made from a high resistance substance such as tungsten. When the current flows through, the filament glows which produces the light. When it burns out, no electricity passes and no glowing occurs. Source: i just know
Silicon, with an index of 3.96, is the lowest I could find.
It consists of dielctric substrate with a strip conductor on one side and complete conducting layer on the other. It is basically an open structure and requires high dielectric constant substrate to confine the fields near the strip conductor
It causes light to slow down significantly.
Compared to a low density substance and all other things being equal, it would be heavier.
Electrolytic Capacitors:1. It provides high capacitance in small volume.2. It has got polarity.3. It is not suitable for high frequencies due to losses in dielectrics.4. It is generally available in 1-100 µF rangeNon-Electrolytic Capacitors:1. Its capacitance depends on dielctric constant of the bulk.2. It doesn't have polarity.3. It is widely used at all frequencies.4. It ranges from pico Farads to fractions of µF.
A substance that has high reactivity displaces dissolved oxygen.
Density is dependent on mass and volume. Density is not a fixed constant for all substances either. The measure of density is by substance based on the above factors.
A high Hansch hydrophobicity constant implies that the molecule is lipophilic.
Oxygen does not react with air or water. Nothing actually "reacts" with light as it is not a substance. It can induce a reaction in some substance, but not oxygen. Oxygen will, however react with some acids mostly organic ones, at high temperatures.
-- Higher refractive index for a substance means light travels slower through that substance. -- The rate at which the electric and magnetic fields in the wave are wiggling (the frequency) doesn't change, regardless of what substance the wave is moving through. -- The distance between wiggles is the wavelength. Since the light is progressing slower through the substance, it can't cover as much distance between wiggles.
NO, it does not test positive for cannabis or any other substance because it is simply not a substance, I'm on probation and have to submit random UA's and my urine is always clean despite my constant smoking, it's nice when you can no longer smoke pot, but still get high!
high