To make something move up and down with a motor, you can use a linear actuator that converts rotary motion into linear motion. To make something rotate using a motor, you can attach the motor to a shaft or gear mechanism that will rotate the object. By controlling the speed and direction of the motor, you can achieve the desired movement.
A pinwheel is something you blow on to make it spin. It has a colorful design with blades that rotate when air is blown onto them.
To make a motor using magnets, you can create a simple design with a coil of wire and a magnet. When an electric current flows through the coil, it creates a magnetic field that interacts with the magnet, causing the coil to rotate. This rotation can be used to create mechanical motion in a motor.
we will let the air of the original fan rotate and anywhere we want we will stick the paper fan and automatically it will rotate
No, insulation creates a barrier to slow down heat transfer, helping to maintain the temperature of the object it surrounds. It does not have the ability to actively cool something down.
To make an electromagnet rotate, you can place it in the proximity of a permanent magnet. When a current flows through the electromagnet, it interacts with the magnetic field of the permanent magnet, causing the electromagnet to rotate. This setup can be used in devices like electric motors and generators.
A pinwheel is something you blow on to make it spin. It has a colorful design with blades that rotate when air is blown onto them.
They might because they need something to make the thingy rotate
and force is when you push or pull and a motor is something that is used to make a fun spin
I assume you mean an electric car. As an electric motor uses magnets or magnetism to rotate
The moment of inertia tells us how easy or how difficult it is to make something rotate.
Are you going to use the 9-volt motor as a dynamo, and the 9-volt dynamo as a motor? Yes, the motor can rotate the dynamo because DC motors and DC generators are actually the same thing--they just apply power to the terminals of a motor to make it turn, and turn the shaft of a generator to make power appear at the terminals. Having said that, if you're going to try to connect the shaft of a 9v motor to the shaft of a 9v dynamo, and use the dynamo to power the motor so as to create a perpetual motion machine...that won't work. The motor wastes a little bit of energy, as does the dynamo. It is possible to build a device that uses a motor to drive an alternator, which is the AC version of a dynamo. You power the motor from the AC grid, and power something that's very sensitive to noise on the line from the alternator. This is called a Motor Generator set, and it's how they powered Cray-1 supercomputers.
To make a motor using magnets, you can create a simple design with a coil of wire and a magnet. When an electric current flows through the coil, it creates a magnetic field that interacts with the magnet, causing the coil to rotate. This rotation can be used to create mechanical motion in a motor.
Depending on the type of DC motor, it will either run normally or just heat up and make noise.i think the motor will rotate to and frow.means it will rotate in clycle.it will complete half cycle.and after it will complete its other half cycle in anticlockwise direction.
Use an electric motor.Definition for electric motor:Web definitions:a motor that converts electricity to mechanical work.wordnetweb.princeton.edu/perl/webwn
No it is not possible to build a mini bike with a starter motor hanging down underneath.
All motors have the ability to rotate in either direction. The motor has to be connected to additional equipment to make this happen. In a three phase motor a reversing magnetic contactor is used and in single phase motor usually a drum switch is used.
no it will only make the battery not charge