answersLogoWhite

0

In a flapper nozzle, the flow rate of the fluid passing through is directly proportional to the difference in pressure across the nozzle. As the pressure increases, the flow rate also increases. This relationship between pressure and flow rate is governed by equations such as Bernoulli's principle and the equation of continuity.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Physics

Why does pressure drops in a nozzle?

Pressure drops in a nozzle due to the conversion of potential energy into kinetic energy as the fluid accelerates through the nozzle. This decrease in pressure is necessary for the fluid to reach a higher velocity.


What is the difference between Diffuser and nozzle?

A nozzle is a device which increases the velocity of fluid by decreasing the Pressure but contrary to it Diffuser is a device that increases the Pressure of fluid at the expense of its velocity


Why does air rush into a vacuum cleaner nozzle?

To understand why air rushes into a vacuum cleaner nozzle we need to trace air flow in the machine. Let's do that. The motor in a vacuum cleaner spins a fan, and the fan moves air. The air intake for the fan is connected to ducting that is routed to the nozzle. As the fan forces air out in its exhaust stream, it creates low pressure on the suction side of the fan. This low pressure (a partial vacuum) is felt along the air path to the nozzle. At the nozzle, outside air pressure forces air into the ducting where air pressure is lower. The moving air has picked up debris and carries it along. That debris ends up in a bag or filtered dirt canister or someplace else where it can accumulate and be collected for disposal. This applies to machines that have bags or filters to get the debris out of the air stream before it goes through the motor to keep it cool. Some machines isolate the motor from the air stream created by the fan, and the motor is cooled by another fan. These "direct" vacuums operate in a way that sees the air stream and the debris pass through the fan and be driven into a bag. The operation of the fan has created a low pressure area along the ducting between it (the fan) and the nozzle. Outside air pressure, being greater than the low pressure created by the fan and ducted to the nozzle, forces air into the nozzle.


How can expansion take place when steam pass through a nozzle?

When steam passes through a nozzle, it undergoes adiabatic expansion due to the decrease in pressure. This expansion causes the steam to increase in velocity as it exits the nozzle, converting some of its internal energy into kinetic energy. The increase in velocity results in a decrease in pressure and an increase in velocity, which can be harnessed in devices such as turbines.


How does a water droplet machine work to create precise and controlled droplets?

A water droplet machine works by using a nozzle to control the size and frequency of droplets. The machine applies pressure to the water, forcing it through the nozzle to create droplets of a specific size. By adjusting the pressure and nozzle size, the machine can produce precise and controlled droplets for various applications.

Related Questions

What is a Pneumatic Flapper Nozzle?

A device subject to US patent US2917063 A. a flapper and. nozzle arrangement of a pneumatically operated mechanism.


whats the Construction of a Positioner Assembly?

Before going into the calibration process, it is important to understand the design of a positioner assembly. The following pointers will help you understand it better. The positioner assembly of a control valve consists of a flapper-nozzle, cam linkage, summing beam, and spring and a diaphragm interlinked together with the help of mechanical linkages. The summing beam is connected between the cam-spring linkage and the bellow. The action of cam-spring is directed by the pressure applied by the flapper-nozzle, which eventually triggers the motion of the summing beam. The diaphragm displays the applied and exerting pressure on/by the flapper assembly.


What is the proper way to use a tire pressure nozzle to check and adjust the tire pressure of a vehicle?

To check and adjust tire pressure using a tire pressure nozzle, first remove the valve cap from the tire. Attach the nozzle to the valve stem and press the gauge to check the current pressure. If the pressure is low, add air using a compressor until it reaches the recommended level. If the pressure is too high, release air by pressing the nozzle's release button. Repeat the process for all tires and replace the valve caps when finished.


What is critical pressure in nozzle?

Critical pressure in a nozzle is the pressure at which the flow of material through the nozzle reaches its maximum. Beyond which any increase in pressure will not result in an increase in flow. The point at which the velocity of a fluid in the throat of the nozzle reaches the local speed of sound, creating a sonic wave, or a sonic choke.


Why does pressure drops in a nozzle?

Pressure drops in a nozzle due to the conversion of potential energy into kinetic energy as the fluid accelerates through the nozzle. This decrease in pressure is necessary for the fluid to reach a higher velocity.


How do you calculate the exit pressure of a nozzle?

How to calculate the ratio of the inlet-to-exit area of the nozzle


What is nozzle pressure?

Pressure build up due to restricted orifice.


What is the best way to adjust the water pressure nozzle for optimal performance?

To adjust the water pressure nozzle for optimal performance, start by turning the nozzle to the lowest pressure setting and gradually increase it until you reach the desired pressure. Experiment with different settings to find the best pressure for your specific cleaning needs.


What are the benefits of using a high pressure nozzle for a pressure washer?

Using a high pressure nozzle for a pressure washer provides more powerful cleaning, faster results, and better efficiency compared to lower pressure nozzles.


How do you adjust the nozzle opening pressure of injector on diesel engines?

by rotating the ring which cover the opening of the nozzle


Why do rockets have a Diverging Nozzle at the exit?

To increase the exhaust velocity. +++ Pressure, not velocity. A gas flowing through a divergent nozzle gains pressure at the cost of speed.


What is use of jet nozzle?

To increase thrust or pressure