Im borat im from kazahstan, kazahsta is the greatest country in thw world
Efficiency is a quantity typically expressed as a percentage to measure the ratio of work output to work input. It indicates how effectively a system or process is utilizing energy or resources to produce desired outputs.
The efficiency of the machine can be calculated using the formula efficiency = (useful output / total input) * 100%. In this case, the efficiency of the machine would be (67J / 150J) * 100% = 44.7%. This means that the machine is operating at 44.7% efficiency in converting input work to useful output.
The efficiency of a machine is typically calculated as the ratio of useful work output divided by total work input, then multiplied by 100 to get a percentage. For example, if a machine outputs 80 units of useful work for every 100 units put in, the efficiency would be 80%.
The relationship between work input and work output is defined by the efficiency of a system. Efficiency is a measure of how well a system converts input work into output work and is calculated as the ratio of output work to input work. A higher efficiency indicates a more effective conversion of work input to work output.
Energy efficiency is typically calculated using the equation: Energy Efficiency = (Useful energy output / Energy input) * 100%. This formula helps to quantify how effectively an energy source is converted into useful outputs relative to the total input energy.
The salary problem has 2 outputs for each input value.
Yes
yes
There are 2 outputs for each positive input value in the Catwalk problem.
Input
A 4-input decoder can produce (2^n) outputs, where (n) is the number of inputs. For a 4-input decoder, (n = 4), so the number of possible outputs is (2^4 = 16). Therefore, a 4-input decoder can generate 16 distinct output lines based on the 4 input combinations.
Input as your using touch to control it and to INPUT data. Output too- Outputs data.
An input/output table works like this:You input something, and through a function, it outputs something else!Say I Had a function that is: input+2If I were to input 5, It would output 7All an input/output table does is displays a couple examples of multiple inputs with their outputs! Put tables only operate on one function....Example:Function: Input x 5 + 3INPUTS - OUTPUTS----------------------1 - 82 - 133 - 186 - 3310 - 53
Input, money. Output, transportation.
Efficiency is a quantity typically expressed as a percentage to measure the ratio of work output to work input. It indicates how effectively a system or process is utilizing energy or resources to produce desired outputs.
If every input has an output. If two outputs are the same, they must have the same input.
There can only be one output for each input.