You can attach a motor to a battery by connecting the positive terminal of the battery to the positive terminal of the motor using a wire, and connecting the negative terminal of the battery to the negative terminal of the motor. This will allow the motor to receive power from the battery and start spinning when turned on.
make a newton disc .take a motor from a car which uses battery.take a circle cardboard and put it in the motor.connect the wires of the motor using a batteryyour newton disc is ready
Newton's disc is based on the principle of color mixing through persistence of vision. The disc is painted with different colors in segments that, when rapidly rotated, blend together to create the illusion of white light. This demonstrates how our eyes perceive colors and how they can be mixed optically.
A Newton disc is a disc with segments in rainbow colours. When the disc is rotated, the colors fade to white; In this way Isaac newton demonstrated that white light is a combination of the seven different colors found in a rainbow. A Newton Disc can be created by painting a disc with the seven different colors. A combination of red, green and blue in the circular disc will yield the same result. This is due to the phenomenon called persistence of vision
To identify the correct type of disc for cutting material, consider factors such as the material being cut (metal, wood, concrete), disc size, disc thickness, and the speed rating of the disc. Consult the manufacturer's guidelines and ensure the disc is compatible with the cutting tool being used for optimal results and safety.
To use a gravity disc in a centrifuge, place the disc at the bottom of the centrifuge tube before adding your sample. The disc's density should be higher than the sample to help separate components based on their density during centrifugation. When the centrifuge spins, the disc will assist in pushing particles to settle at the bottom of the tube based on their relative densities.
make a newton disc .take a motor from a car which uses battery.take a circle cardboard and put it in the motor.connect the wires of the motor using a batteryyour newton disc is ready
The weight of a compact disc is approx 1.6 Newtons.
You forgot to attach the disc to the question.
You can attach the Garmin Nuvi 265WT GPS system to the dash by the dash board disc which is included. You stick the disc to the area you want it to be on the dash, then attach it to the disc with the suction cup stand which are also included.
we can make a newtons disc on cd bypasting different colored papers on the cd (vibgyor)and start rotating it
There are several motors in disc players. First, there is a platen motor to rotate the disc. There are normally two motors for the laser head to move the laser across the disc and to raise and lower the head. These keep the laser tracking the disc correctly. Finally, there is a motor to open and close the disc tray.
Never heard of a disc motor. If you are interested open a discuss question page.
Newtons wheel suggested by Newton is a disc divided into 7 sections each containing one of the colours of the spectrum when spun the eye can not focus on the individual colours and so the merge together combining to form a white disc.
This is the basal disc. It is useful in helping the hydrozoans stick to and stay on the rocks around them.
A battery is not always a cylinder. It may be a flat disc or a cube as well as a cylinder.
It spins by itself or else its broke
Newton's disc is based on the principle of color mixing through persistence of vision. The disc is painted with different colors in segments that, when rapidly rotated, blend together to create the illusion of white light. This demonstrates how our eyes perceive colors and how they can be mixed optically.