The answer will depend on the pressure under which the CO2 is stored.
Masonry sand is estimated to weigh approximately 160 pounds per cubic foot. Therefore, it would take 12.5 cubic feet of masonry sand to equal one ton.
Assuming solid limestone, not pulverized: Solid limestone weighs approximately 163 lbs per cubic foot. If we divide 2000 by 163, we come up with 12.27 cubic feet. a cubic yard is 27 cubic feet, so a ton of limestone (12.27 cubic feet) would be about .45 cubic yards.
There can be no conversion.A ton is a measure of mass. A cubic metre is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
yes, it is. 40 tonnes converts to about 39 tons, or 78,000 pounds.
One ton of rice (2,000 pounds) roughly occupies about 48 cubic feet or 1.4 cubic meters of space. This can vary depending on the type of rice and how it is packaged or stored.
Unless you know the desnity, or the substance - you can't. One ton of gravel wouldn't be the same cubic feet as one ton of wheat.
Without knowing the density of the material it is not possible.The question has no meaning. A ton is a measure of mass, cubic feet is a measure of volume. It makes as much sense as asking how heavy one hour is.
To convert tons to cubic feet (cft), you need to know the density of the material in question. The formula for converting tons to cubic feet is: cubic feet = (tons / density). For example, if you have 2 tons of a material with a density of 100 pounds per cubic foot, the conversion would be: cubic feet = (2 tons / 100 lb/ft^3) = 0.02 cubic feet.
One ton of granite is equivalent to approximately 36 cubic feet.
about 6 cubic feet
At 100 pounds per cubic foot, that is 20 cubic feet per ton = 0.57 cubic meters
2.13 ton of what? Ton is a unit of mass, and cubic feet is volume. So you would need to know the density of the material, in order to determine volume from mass.
One metric ton of plain water has a volume of about 35.32 cubic feet.
Knowing that 1 cubic foot is pretty much equal to 100 pounds or 0.05 ton, 1 ton of gravel is around 20 cubic feet.
I
Perhaps you mean cubic feet. In that case it would be about 30 cubic feet.
Sorry, you can only convert 1 metric ton of water to cubic meters (not square meters). Square meters are an area and cubic meters are a volume.