pi × r2 × L (r=radius, L=length)
The volume of 1 meter of 15mm pipe can be calculated using the formula for the volume of a cylinder: πr^2h. Given the radius of the pipe (15mm/2 = 7.5mm) and the height (1 meter), you can plug these values into the formula to find the volume.
The pipe's volume is the product of its cross-sectional area and its length. The area of a circle is pi*(radius)^2, so in this case pi*9sq.in. or about 28.3 square inches. Multiply this area by the length of pipe you are using to obtain a volume. A 10 foot length of 6 inch pipe will have 3393 cubic inches of volume or 1.96 cubic feet, or 14.7 US Gallons.
You calculate its volume, look up the density of bronze, then multiply volume x density to get mass. Probably that's what you want; if you really want weight, you multiply mass x gravity to get the weight.
To calculate the volume of liquid in the pipe, we need to first calculate the cross-sectional area of the pipe using the formula for the area of a circle (Area = π * (radius)^2) with the radius being half of the diameter. Then, we can multiply the cross-sectional area by the length of the pipe to find the volume. Finally, convert the volume from cubic feet to gallons if needed.
To calculate the weight of an HDPE pipe, you can use the formula: Weight = Volume × Density. First, calculate the volume of the pipe using the formula for the volume of a cylinder (πr²h, where r is the radius and h is the height), and then multiply it by the density of HDPE to get the weight. Density of HDPE can range from 0.93 to 0.97 g/cm³ depending on the grade.
The volume of this pipe is 28,510,000 mm3
The volume of this pipe would be 0.3817 m3
The volume of the pipe is 1,154.5 cubic feet.
The internal diameter of the pipe times pi times its length will yield the volume it can contain. The outer diameter of the pipe times pi times its length will yield the volume that the pipe will displace when it is submerged or buried. The volume the pipe will displace minus the volume it will contain will yield the volume of material that makes up the pipe.
The volume of this pipe is 261.8 cubic feet.
measure the radius of the pipe. (half the diameter - the width of the pipe) then measure the length of the pipe. then use the formula pi (3.14) x radius2 x length. the answer is the volume in the pipe
It depends on the type of figure. If it is a 2D figure, then it is called area. If it is a 3D figure, then it is called volume.
-12690
The volume of this pipe is 1,113 cubic inches or 0.644 cubic feet.
The volume of a 12 inch x 12 inch pipe is: 1,360 cubic inches
An L shaped figure is a plane figure and so will not have a volume.
To calculate pipe displacement, you can use the formula: Displacement = π × (d/2)² × L, where d is the diameter of the pipe and L is the length of the pipe. This formula derives from the volume of a cylinder, as the pipe's cross-section is a circle. Make sure to use consistent units for diameter and length to obtain the displacement in cubic units.