0
What else can I help you with?
What would you use to measure the size of a force?
Newtons or Pounds... Newtons is more common.
What is the unit of radius used to measure the size of a circle?
The unit of radius used to measure the size of a circle is typically in units of length, such as inches, centimeters, or meters.
How can you measure the size of microscopic object using micrometer?
To measure the size of a microscopic object using a micrometer, you can place the object on a glass slide under a microscope and use the micrometer on the microscope to measure its dimensions in micrometers. Alternatively, you can use image analysis software to measure the object's size based on images taken with a microscope.
How do you measure grinded material to mesh size?
You can measure the particle size of ground material using a mesh size scale. This scale categorizes particles based on the number of openings per linear inch, with a higher number indicating smaller particle size. To measure, pass the material through a mesh sieve and use the corresponding mesh number to determine the particle size range.
What is the measure of the size of the disturbance from a wave?
The measure of the size of the disturbance from a wave is typically expressed in terms of its amplitude, which represents the maximum displacement of a particle in the medium from its rest position. Amplitude is a measure of how much energy a wave carries.
Does the pulley size make a difference?
no. the size of a pully makes little difference to its action on a rope as the only thing changing is how much of the rope is in contact with the pully and since the pully rotates it makes it no easier or harder to pull the rope.
What size is the rear pully 1993 fxstc harlydavedson?
65 teeth.
What size are water pump pully bolts for 1998 Saturn sc2?
10mm
What size is the replacement bolt on the 03 Kia Sedonia crankshaft pully?
Mr ben
What size bolts are used to remove crankshaft pully on 97 Nissan Pathfinder?
1 1/8"
How do you loosen the serpentine belt on a 1995 jeep sport?
There should be an extra pully. This pully appears to not go to anything, however it's job is go keep the belt tight. I don't recall the wrench size, I think it's 16mm. Put the wrench on the pully's center nut and push or pull towards the center, this should move the pully enough to get the belt off.
What size belt to bypass ac in 2002 Taurus?
you cant. the top side of the belt will rub on the a/c pully
How do you take off the water pump pully off of a 91 Chevy Lumina without the pully turning?
wrap the belt around the pully to hold pully still
How do you measure nominal pipe size?
Measure the inside diameter and that is your nominal size.
How do you measure size of taps?
With a tape measure!
How do you remove the pulley from a 1991 6 cylinder Jeep Cherokee power steering pump?
The belt pully on most Cherokees is pressed onto the pump shaft. It will take the appropriate size gear puller to remove. The same remains on installing the pully on a new pump. The action of the puller has to be reversed and used to press the pully onto the new shaft.
What does a pully do?
A pully is used to lift thing depending on how big the obJect is
