0
For a digital heat anticipator, a bimetallic strip is a piece of metal made by laminating two different types of metal together. The metals that make up the strip expand and contract when they're heated or cooled. Each type of metal has its own particular rate of expansion, and the two metals that make up the strip are chosen so that the rates of expansion and contraction are different. When this coiled strip is heated, the metal on the inside of the coil expands more and the strip tends to unwind. The center of the coil is connected to the temperature-adjustment lever, and the Mercury switch is mounted to the end of the coil so that when the coil winds or unwinds, it tips the mercury switch one way or the other.
What else can I help you with?
How much work is done by the heat engine if it takes in 2000J of heat and rejects 1500J of heat?
Work done=Heat in-Heat out 2000-1500=500J
Which describes the work done by the heat engine?
A heat engine converts heat energy into mechanical work. It operates by taking in heat from a high-temperature source, using it to do work, and then releasing the remaining heat to a low-temperature sink. The efficiency of a heat engine is the ratio of the useful work output to the heat input.
The amount of work done by heat engine equals the amount of what?
The amount of work done by a heat engine equals the difference between the heat input and the heat output of the engine. This is known as the heat engine's thermal efficiency.
What is capacity to do work or transfer heat?
That would be energy. Energy is the ability of a system to do work or transfer heat.
How much heat is generated by 1700 joules of work?
The heat generated by 1700 joules of work depends on the efficiency of the process. In an ideal case where all the work is converted into heat, the heat generated would also be 1700 joules. However, in real-world scenarios, the heat generated would be less due to energy losses.
A heat engine is a device that converts work into heat?
No, a heat engine is not a device that converts work into heat. It is the opposite, which means it is a device that converts heat into work.
How much work is done by the heat engine if it takes in 2000J of heat and rejects 1500J of heat?
Work done=Heat in-Heat out 2000-1500=500J
What is the difference between heat engine and heat pump?
Heat Engine is the system that converts the Heat energy into mechanical work while Heat pump converts the work into heat
Which describes the work done by the heat engine?
A heat engine converts heat energy into mechanical work. It operates by taking in heat from a high-temperature source, using it to do work, and then releasing the remaining heat to a low-temperature sink. The efficiency of a heat engine is the ratio of the useful work output to the heat input.
Heat given off by fireplaces is an example of?
convection to heat the room conduction to heat the metal work and brick work
Why does your heat only work when your car is moving?
The heat will also work when the car is turned on, but not moving. It uses heat from the engine.
Does heat engines use heat to do work?
by engine
What is the introduction of heat and work?
An introduction to heat and work can be found in any basic physics textbook.
The amount of work done by heat engine equals the amount of what?
The amount of work done by a heat engine equals the difference between the heat input and the heat output of the engine. This is known as the heat engine's thermal efficiency.
Heat doesn't work in Lincoln ls?
my heat doesnt work in my2000 lincoln ls what causes this
What is capacity to do work or transfer heat?
That would be energy. Energy is the ability of a system to do work or transfer heat.
What is the heat engine?
a machine that transforms heat into machanical energy, or work
