not sure just know it measures wind speed
The types of mechanical work include static work, dynamic work, and intensive work. Static work refers to work done without motion, dynamic work involves movement, and intensive work focuses on the internal energy changes within a system.
Input work is the work done on a machine, while output work is the work done by the machine. Efficiency of a simple machine is calculated as the ratio of output work to input work. The efficiency of a simple machine is high when the output work is close to the input work, indicating that the machine is converting most of the input work into useful output work.
The formula that relates work and power is: Power = Work / Time. Power is the rate at which work is done, which is the amount of work done divided by the time it takes to do that work.
the work a machine does is the work output what it takes to do the work is the work input
The formula to find the work output of efficiency is: Work output = Efficiency x Input work. Efficiency is a ratio of output work to input work, so multiplying this ratio by the input work gives the work output.
Windspeed
The Anenometer.
barometer and anenometer and theremometer and hygrometer and weather vane
C. Wind speed. An anemometer is a device used to measure the speed and direction of the wind.
The weather tool that would be used to measure 318 mph would be a anenometer which measures windspeed. Hope this helped! :)
The insturment you mean is called an "anenometer". The rotor that catches the wind normally consists of 3 or 4 equally-sized hollow hemispheres about 3" / 75mm diameter, each attached to an arm perhaps 8" / 200mm long extending radially and equally-spaced from a small hub on a vertical spindle. You could probably use old tennis balls or similar to make the cups. The tricky bit is recording the speed, and for that you need a suitable tachometer ("rev. counter") This has to be calibrated so that you know the relationship between actual wind speed and the rpm of the rotor. I you assume (possibly not entirely accurtately) that the peripheral speed of the rotor = the wind speed then it's a simple matter to calculate the wind speed from the rpm, using our old friend Circumference =pi X Diameter. Good luck - if I needed an anenometer I'd find it rather easier to buy one and know the readings will be in mph or km/h and be reasonably accurate!
This is something I believe that is better to leave it to the wikipedia article on the anenometer. There are varios types and you should get the whole information. So go to the related links box below for the article.
They got their education by secretly learning it if their master didn't allowed because it was illegal. Sometimes, their masters tought the slave even though it was against the law. By secretly learning it, they could learn it off another slave or steal a book and educate themselves.
Wind Speed: Anenometer. ... Wind Direction: Wind Vane (with angular position indicator if remotely monitored) - there may be a "proper" term for it. ... Temperatures: Maximum & Minimum Thermometer. .... Humidity: Hygrometer. Rain-fall: Rain Gauge. .... Sunshine: not sure of its proper name but an instrument consisting of a glass ball that focuses the sunlight onto a specially-prepared paper, to create a mark whose length is proportional to the time of sunshine. (My inspired guess at "heliograph" produced on-line information about anything and everything except that to do with the weather!) .... Clouds: certain cloud and precipitation measurements are made using radar
Work , Work , Work , Work , Work , Work ! They do what You lazy Americans don't . Mexicans work hard . They do it all !
A calendar at your work, for your work, that has your work schedule on it, etc.
The verb in "you work late" is "work."