answersLogoWhite

0

the agitator on most washers go back and forth . at least one i know of goes up and down. we will talk about the back and forth.Underneath the tub usually accessable from the back of the machineis a transmission and belt along with other things. when you start the washer it will fill with water . When the correct volume of water is reached a switch is activated that sends power to the timer which in turn routes power to the proper connections needed to agitate. now when washing power is sent to a agitator control which lifts a plunger that makes the transmission rock back and forth which is calledagitation

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Why does the agitator barely move in a washing machine?

A possible reason for the agitator barely moving in a washing machine could be a broken or malfunctioning agitator coupling. Another reason could be a problem with the drive belt that connects the motor to the transmission, causing the agitator to not move properly. It's best to have a professional technician diagnose and repair the issue.


What is an agitator and how is it used?

An agitator is a device or mechanism to put something into motion by shaking or stirring. There are several different types of agitators, such as manual, a washing machine agitator, and a magnetic agitator.


Who invented the agitator that is used in the washing machines today?

The agitator used in modern washing machines was invented by Frederick Louis Maytag in the early 20th century. The agitator helps to move clothes around in the washing machine to ensure a thorough cleaning process.


What is causing the washing macine agitator to run when it is in the spin cycle?

When you washing machine is in the spin cycle the agitator should rotate along with the drum of your washing machine and that's normal. There is no way it could be going up and down and will only appear that is is agitating while on spin.


How can you get to the small open space beneath the agitator of a Kenmore Elite washing machine?

agitator cap can be unscrewed, then the retaining nut removed, then the agitator pedestal can be pulled up off the drive splines.


What is the thing in the middle of the washing machine?

that would be the agitator. it moves the laundry around to 'swish' the water through your clothes.


What is the center piece in the washing machine that moves the water and clothing around with an irregular rapid motion?

Agitator


Why do clothes get stuck under agitator?

Clothes can get stuck under an agitator in a washing machine if they are not evenly distributed around the drum. When the agitator starts to move, it can push some items down towards the bottom where they may become trapped. Ensuring a balanced load and not overfilling the machine can help prevent this issue.


Why will the agitator on a Kenmore washing machine not turn?

The agitator has two parts. One is the bottom agitator and then you have the top agitator that moves the clothes around. If the top part of the agitator is not moving. You probably need to replace the dog ears. A great sight to look this info up is www.repairclinic.com. I have ordered from them before. Good Luck! Karen


What energy transformation occurs in the washing machine?

In a washing machine, electrical energy is transformed into mechanical energy to move the agitator and spin the drum. Heat energy may also be generated during the washing or drying cycles to warm the water or air.


What causes the agitator in a washing machine stop working?

It depends on what type of washer it is. If it's a GE model, and the motor / transmission is good most likely your problem is the Agitator Coupler which is located beneath the agitator If the washer is made by Whirlpool / Kenmore and the motor / transmission is good most likely your problem is the Agitator Dogs which are located inside the agitator Both are easy and inexpensive fixes


Why is my washing machine making noise when agitating?

Your washing machine may be making noise when agitating due to a worn-out or faulty agitator, loose or damaged components, or an unbalanced load. It is recommended to have a professional inspect and repair the machine to prevent further damage.