0
What else can I help you with?
How can mechanical advantage be calculated for a wrench?
The mechanical advantage of a wrench can be calculated by dividing the length of the wrench handle by the distance from the point where force is applied to the point where the wrench makes contact with the object. This ratio indicates how much force is amplified by using the wrench compared to direct application of force. A higher mechanical advantage means less force is required to turn the wrench.
John applies force of N to a wrench. If the wrench applies a force of N to a bolt which of these values is the input force and which is the output?
The input force is the force that John applies to the wrench, which is N. The output force is the force that the wrench applies to the bolt, which is also N.
Does the length of a ramp affect the amount of force needed?
Yes, the length of a ramp can affect the amount of force needed to move an object up it. A longer ramp might require less force to move an object compared to a shorter ramp, as the incline is more gradual. The force needed can also depend on the weight and friction of the object being moved.
Does force affect a pendulum?
Yes, force can affect a pendulum by changing its amplitude or frequency of oscillation. For example, increasing the force acting on a pendulum can cause it to swing with a larger amplitude. However, the force does not change the period of a pendulum, which is solely determined by its length.
A bolt needs to be tightened with a torque of 35 N-m You use a 25 cm wrench and pull at an angle of 60 degrees how much force do you need to exert?
To calculate the force needed to tighten the bolt, use the formula: Force = Torque / (Wrench length * sin(angle)) Force = 35 N-m / (0.25 m * sin(60 degrees)) Force = 141.42 N Therefore, you would need to exert a force of approximately 141.42 N to tighten the bolt.
How can mechanical advantage be calculated for a wrench?
The mechanical advantage of a wrench can be calculated by dividing the length of the wrench handle by the distance from the point where force is applied to the point where the wrench makes contact with the object. This ratio indicates how much force is amplified by using the wrench compared to direct application of force. A higher mechanical advantage means less force is required to turn the wrench.
What value would be indicated on the scale of a 20 inch torque wrench equipped with a 12 inch linear extension when the wrench is actually delivering 80 lb ft of torque?
M1 = M2 x L1 / L2M1 is the torque setting of the wrench.M2 is the actual torque applied to the nutL1 is the normal length of the wrenchL2 is the extended length of the wrench (Length of wrench + length of adapter)Remember... Torque = Force x Radius
How does length of spring coil affect the force constant?
The force constant is unaffected; It is a constant.
What is the torque force if you are turning a wrench that is 55cm long and you are using 15N of force?
torque = force * lever length torque = 15 * 55 torque = 825 n-cms
John applies force of N to a wrench. If the wrench applies a force of N to a bolt which of these values is the input force and which is the output?
The input force is the force that John applies to the wrench, which is N. The output force is the force that the wrench applies to the bolt, which is also N.
Does the length of a ramp affect the amount of force needed?
Yes, the length of a ramp can affect the amount of force needed to move an object up it. A longer ramp might require less force to move an object compared to a shorter ramp, as the incline is more gradual. The force needed can also depend on the weight and friction of the object being moved.
Does force affect a pendulum?
Yes, force can affect a pendulum by changing its amplitude or frequency of oscillation. For example, increasing the force acting on a pendulum can cause it to swing with a larger amplitude. However, the force does not change the period of a pendulum, which is solely determined by its length.
WhICH wrench can be used to tighten a nut or bolt with a precise amount of twisting force?
A torque wrench tightens with a precise amount of force.
You want to tighten a bolt on your cars engne with the aid of a wrench of length 30 cm The manual says that you need to apply a torque of 135 Nm What is the minimum you could apply to the wrench?
using the equation = moment = force x perpendicular distance from pivot we can say for a constant moment, the minimum force will be used when the distance is at a maximum. in this case, 0.3 metres. 135 = force x 0.3 force = 135 / 0.3 force = 1350/ 3 force = 450 N
A bolt needs to be tightened with a torque of 35 N-m You use a 25 cm wrench and pull at an angle of 60 degrees how much force do you need to exert?
To calculate the force needed to tighten the bolt, use the formula: Force = Torque / (Wrench length * sin(angle)) Force = 35 N-m / (0.25 m * sin(60 degrees)) Force = 141.42 N Therefore, you would need to exert a force of approximately 141.42 N to tighten the bolt.
If you add an exton to your torque wrench does it change the torque?
as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque
Does the length of a string have any effect on the reading of the spring scale?
No, the length doesn't affect the reading because the mass is constant and therefore, the weight is constant. The string's weight is so small that it can be neglected.
