The simple answer: The Pelamis wave energy converter absorbs the energy from ocean waves and converts it into electricity. Waves make the Pelamis wiggle on the surface of the sea like a snake, and the motion at each joint is captured through a hydraulic system.
The detailed answer (from their brochure): The Pelamis is an offshore wave energy converter, typically installed 2-10km from the coast in deep water.
The Pelamis machine is made up of a number of tubes floating on the surface of the water, linked by universal joints which allow flexing in all directions. As waves pass down the length of the machine and cause the joints between these sections to bend the movement is converted into electricity via hydraulic power take-off systems housed inside each joint of the machine tubes. Hydraulic cylinders resist the wave-induced motion and pump fluid into high pressure accumulators, allowing electricity to be smooth and continuous. Each of the power take-off units are identical, and operate independently from each other with redundancy of all main components. Power is transmitted to shore using standard subsea cables.
The joints of the machine can be actively controlled to make use of the phenomenon of resonance. Control of the resistance applied by the hydraulic cylinders allows generation to be maximised when waves are small, and the machine response to be minimised in storms. Importantly, the default or natural condition of the machine is benign and non-resonant, and so inherently capable of dealing with extreme conditions.
A Pelamis machine is a type of wave energy converter that captures energy from ocean waves and converts it into electricity. It consists of a series of connected cylindrical sections that flex and generate hydraulic pressure as they move with the waves. The hydraulic pressure is then converted into electricity using a generator.
The machines used for wave power are called wave energy converters (WECs). These devices capture energy from the motion of waves and convert it into electricity. WECs come in various designs, such as point absorbers, oscillating water columns, and attenuators.
Oyster wave energy converter was created in 2009.
the energy Converter is called FOOD CHAIN or maybe ENERGY PYRAMID :))
The generic term for an electrical device that uses and converts electrical energy into other forms of energy would be an electric power converter or simply a converter.
Pelamis Wave Energy Converter was created in 2007.
4,0000000
A Pelamis machine is a type of wave energy converter that captures energy from ocean waves and converts it into electricity. It consists of a series of connected cylindrical sections that flex and generate hydraulic pressure as they move with the waves. The hydraulic pressure is then converted into electricity using a generator.
Pelamis platura was created in 1766.
In California they have developed a system to obtain energy from the waves, the system is called Pelamis Wave Energy Convertor.
The machines used for wave power are called wave energy converters (WECs). These devices capture energy from the motion of waves and convert it into electricity. WECs come in various designs, such as point absorbers, oscillating water columns, and attenuators.
Pelamis Wave Power was created in 1998.
An energy converter is commonly referred to as a power converter or energy transformation device. It is used to convert one form of energy into another, such as converting electrical energy into mechanical energy or vice versa.
Oyster wave energy converter was created in 2009.
The parts of a laptop charger are: the Wall to converter cable, the power converter, the converter to the PC cable and the plug. It operates by the plug passing energy or electricity to the wall to converter cable. The wall to converter cable then passes the energy to the converter. Finally the converter passes on the energy to the PC through the plugged in head connected to the laptop and it's charged.
yes
An electric motor is an example of an electro-mechanical energy converter. It takes electrical energy and converts it into mechanical energy, which is used to do work such as rotate a fan or drive an electric vehicle.