A stroboscope produces flashes of light to freeze the motion of a moving object. By adjusting the frequency of the flashes to match the speed of the object, the object appears stationary or moving slowly, allowing for detailed observation or analysis. This effect is commonly used in scientific research, industrial settings, and entertainment.
It's a calibrated flashing light used to measure the rotational speed of, say, a spinning motor shaft. Like the timing light used by mechanics on a car. The strobe is variable, and it can be "run up" until the flashing light on the spinning object causes the object to "stand still" and not appear to move. Then a peek at the readout of the strobe, and the user will know how fast the object is turning. Note that the shaft doesn't stop turning, but the strobe flashes and it illuminates the same spot on the shaft with every rotation, and that's what makes it (the shaft) appear to stop moving. All the operator need to be concerned about is avoiding a harmonic. If the strobe is flashing at exactly half the speed of the shaft, it will be illuminating the same spot on the shaft each time it flashes, but the shaft will actually have turned twice instead of once. But a good operator can avoid that.
The types of mechanical work include static work, dynamic work, and intensive work. Static work refers to work done without motion, dynamic work involves movement, and intensive work focuses on the internal energy changes within a system.
Input work is the work done on a machine, while output work is the work done by the machine. Efficiency of a simple machine is calculated as the ratio of output work to input work. The efficiency of a simple machine is high when the output work is close to the input work, indicating that the machine is converting most of the input work into useful output work.
The formula that relates work and power is: Power = Work / Time. Power is the rate at which work is done, which is the amount of work done divided by the time it takes to do that work.
the work a machine does is the work output what it takes to do the work is the work input
The principle of a stroboscope is to study rotating, reciprocating, oscillating, or vibrations in objects. A stroboscope is used to make cyclically moving objects appear stationary or slower.
my guess is rpm
Stroboscope.
bhb
A stroboscope light can make a moving object appear to freeze or move in slow motion by flashing light at the same frequency as the object's movement, creating an illusion of stillness or altered speed.
The word "strobe" is derived from the word stroboscope, which was invented in 1832. Stroboscope is a combination of the Greek words "strobos" (meaning spinning) and "skopos" (meaning watcher). The shortened form "strobe" came into common usage in the mid-20th century.
A stroboscope is usually just a lamp, set to flash quickly and repeatedly with an often tuneable and consistent frequency. Strobes used to set the ignition timing on engines with spark plugs usually look a bit like a gun, but otherwise they can look like pretty much any lamp.
A stroboscope is any various instrument used to observe moving objects by making them appear stationary, especially with pulsed illumination or mechanical devices that intermittently interrupt observation.
Planetary atmospheres, the atmospheres of red giant stars, and galaxies were the three primary scientific targets of Stroboscope II.
A stroboscope uses a series of flashes to make a fast moving object seem slower. A stroboscopic tachometer has a scale that reads either in revolutions per minute or flashes per minute.
It's a calibrated flashing light used to measure the rotational speed of, say, a spinning motor shaft. Like the timing light used by mechanics on a car. The strobe is variable, and it can be "run up" until the flashing light on the spinning object causes the object to "stand still" and not appear to move. Then a peek at the readout of the strobe, and the user will know how fast the object is turning. Note that the shaft doesn't stop turning, but the strobe flashes and it illuminates the same spot on the shaft with every rotation, and that's what makes it (the shaft) appear to stop moving. All the operator need to be concerned about is avoiding a harmonic. If the strobe is flashing at exactly half the speed of the shaft, it will be illuminating the same spot on the shaft each time it flashes, but the shaft will actually have turned twice instead of once. But a good operator can avoid that.
strobestrōb/informalnounnoun: strobe; plural noun: strobes1. a stroboscope.a stroboscopic lamp. "strobe lights dazzled her"2.North American an electronic flash for a camera.verbverb: strobe; 3rd person present: strobes; past tense: strobed; past participle: strobed; gerund or present participle: strobing1. flash intermittently."the light of the fireworks strobed around the room"light as if with a stroboscope."a neon sign strobed the room" 2.exhibit or give rise to strobing.