0
What else can I help you with?
Which circumstances would a current register on the galvanometer?
A current would register on a galvanometer when there is a flow of electric charge through the circuit that the galvanometer is connected to. The galvanometer measures the strength and direction of the current passing through it, displaying this information as a deflection on its dial.
What is the difference between ballistic and a deadbeat galvanometer?
A ballistic galvanometer measures charge by letting current flow through a coil and measuring the extent of its deflection. A deadbeat galvanometer is designed to quickly dampen the coil's movement to minimize oscillations, making it more suitable for accurately measuring steady currents.
What is differences between ballistic galvonometer and dead beat galvanometer?
A ballistic galvanometer measures total charge passed through the coil while the deadbeat galvanometer indicates steady state current. Ballistic galvanometers are faster but less accurate due to damping, while deadbeat galvanometers have a faster response time and are more accurate for measuring constant currents.
What is the principle of ballistic galvanometer?
The ballistic galvanometer principle states that when a current-carrying coil is suddenly disconnected from a source, the coil carries on moving because of its momentum. The deflection of the coil is proportional to the charge that passed through the coil while it was connected.
Difference between galvanometer and voltmeter?
A galvanometer is a sensitive current measuring device that primarily indicates the presence and direction of current, while a voltmeter measures voltage in a circuit. Galvanometers typically have lower resistance and higher sensitivity than voltmeters, which are designed to measure voltage across a component or circuit.
Which circumstances would a current register on the galvanometer?
A current would register on a galvanometer when there is a flow of electric charge through the circuit that the galvanometer is connected to. The galvanometer measures the strength and direction of the current passing through it, displaying this information as a deflection on its dial.
Why galvanometer are used in electronic instruments that measures low current and voltage?
The galvanometer is very sensitive.
What is the unit measured in with a galvanometer?
It measures current.
What is the difference between ballistic and a deadbeat galvanometer?
A ballistic galvanometer measures charge by letting current flow through a coil and measuring the extent of its deflection. A deadbeat galvanometer is designed to quickly dampen the coil's movement to minimize oscillations, making it more suitable for accurately measuring steady currents.
How do you convert galvanometer to ohmmeter?
Ohms are the unit of measurement for resistance, so an ohmmeter is a device that measures electrical resistance. A galvanometer measures the current flowing through the resistance, so the two are related. To convert a galvanometer into an ohmmeter, one needs an external battery.
What instrument measures current flowing through wires in a house?
galvanometer
What is differences between ballistic galvonometer and dead beat galvanometer?
A ballistic galvanometer measures total charge passed through the coil while the deadbeat galvanometer indicates steady state current. Ballistic galvanometers are faster but less accurate due to damping, while deadbeat galvanometers have a faster response time and are more accurate for measuring constant currents.
What instrument measures small currents?
A galvanometer is used to measure small currents.
What is the principle of ballistic galvanometer?
The ballistic galvanometer principle states that when a current-carrying coil is suddenly disconnected from a source, the coil carries on moving because of its momentum. The deflection of the coil is proportional to the charge that passed through the coil while it was connected.
What quantity measures the galvonometer?
A galvanometer is a type of ammeter: An instrument for detecting and measuring electric current.
What is the difference between ammeter and galvanometer?
i want this answer
Why is the lamp and scale arrangement in a ballisitics galvanometer at a distance of 1 meter from the galvanometer?
The lamp and scale arrangement in a ballistic galvanometer is placed at a distance of 1 meter to ensure that the deflection of the galvanometer caused by the current pulse is accurately measured. Placing it at this distance allows for the angular displacement of the galvanometer's coil to be proportional to the charge passing through it, aiding in the precise measurement of the current pulse's magnitude.
