answersLogoWhite

0

Input and output are shown on a force diagram by the human being the input force and the load force being the output force. When you divide output force by input force, you get the mechanical advantage of a lever.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Physics

What are the most common forces shown in a diagram?

The most common forces shown in a diagram are gravity, normal force, tension, friction, and applied force. These forces act on an object to influence its motion or determine its equilibrium.


How do you show forces in a diagram?

Forces can be shown in a diagram using arrows. The length and direction of the arrows represent the magnitude and direction of the force, respectively. You can label the arrows with the type of force and its value if known.


What are the most common forces shown in a free body diagram?

The most common forces shown in a free body diagram are gravity (weight), normal force, tension, friction, and applied forces. These forces represent the interactions acting on an object in a given situation.


How a free body diagram allows you to solve force problems?

A free body diagram isolates the object of interest and shows all the forces acting on it. By analyzing the forces shown on the diagram, one can apply Newton's laws of motion to determine the net force acting on the object. This net force can then be used to calculate acceleration, velocity, or any other relevant quantities needed to solve force problems.


What is the diagram for unbalanced forces?

In a diagram for unbalanced forces, you would typically have two or more arrows representing the forces acting on an object pointing in different directions and with different lengths to indicate the magnitude of the forces. The object will likely be shown moving or accelerating in the direction of the larger force.

Related Questions

How is input and output shown on force diagrams on force?

Input and output are shown on a force diagram by the human being the input force and the load force being the output force. When you divide output force by input force, you get the mechanical advantage of a lever.


How is input force used?

Since we know by conservation of energy that no machine can output more energy than was put into it, the ideal case is represented by a machine in which the output energy is equal to the input energy. For simple geometries in which the forces are in the direction of the motion, we can characterize the ideal machine in terms of the work done as follows: Ideal Machine: Energy input = Energy outputWork input = Fedinput = Frdoutput = Work output From this perspective it becomes evident that a simple machine may multiply force. That is, a small input force can accomplish a task requiring a large output force. But the constraint is that the small input force must be exerted through a larger distance so that the work input is equal to the work output. You are trading a small force acting through a large distance for a large force acting through a small distance. This is the nature of all the simple machines above as they are shown. Of course it is also possible to trade a large input force through a small distance for a small output force acting through a large distance. This is also useful if what you want to achieve is a higher velocity. Many machines operate in this way. The expressions for the ideal mechanical advantages of these simple machines were obtained by determining what forces are required to produce equilibrium, since to move the machine in the desired direction you must first produce equilibrium and then add to the input force to cause motion. Both forceequilibrium and torque equilibrium are applied.


How is force useful?

Since we know by conservation of energy that no machine can output more energy than was put into it, the ideal case is represented by a machine in which the output energy is equal to the input energy. For simple geometries in which the forces are in the direction of the motion, we can characterize the ideal machine in terms of the work done as follows: Ideal Machine: Energy input = Energy outputWork input = Fedinput = Frdoutput = Work output From this perspective it becomes evident that a simple machine may multiply force. That is, a small input force can accomplish a task requiring a large output force. But the constraint is that the small input force must be exerted through a larger distance so that the work input is equal to the work output. You are trading a small force acting through a large distance for a large force acting through a small distance. This is the nature of all the simple machines above as they are shown. Of course it is also possible to trade a large input force through a small distance for a small output force acting through a large distance. This is also useful if what you want to achieve is a higher velocity. Many machines operate in this way. The expressions for the ideal mechanical advantages of these simple machines were obtained by determining what forces are required to produce equilibrium, since to move the machine in the desired direction you must first produce equilibrium and then add to the input force to cause motion. Both forceequilibrium and torque equilibrium are applied.


What are the most common forces shown in a diagram?

The most common forces shown in a diagram are gravity, normal force, tension, friction, and applied force. These forces act on an object to influence its motion or determine its equilibrium.


How do you show forces in a diagram?

Forces can be shown in a diagram using arrows. The length and direction of the arrows represent the magnitude and direction of the force, respectively. You can label the arrows with the type of force and its value if known.


What is the input and output of waveform?

In waveform analysis, the input typically refers to the electrical signal or data that represents a physical phenomenon, such as sound, light, or voltage, which is processed over time. The output is the graphical representation of that signal, shown as a waveform, illustrating variations in amplitude over time. This output can be used to analyze the characteristics of the input signal, such as frequency, amplitude, and phase.


The coefficient of friction between the wall and the 6 kilograms block shown is 0.2 what force will keep the block sliding up uniformly?

I see no diagram. Are you asking what HORIZONTAL force will keep the block from sliding up ? Where is the Diagram?????


What is the range of the relation shown in the mapping?

To determine the range of a relation shown in a mapping, you need to identify all the output values associated with the input values. The range consists of the unique values that the output can take on. If you can provide the specific mapping or a description of it, I can assist in identifying the range more accurately.


What are the most common forces shown in a free body diagram?

The most common forces shown in a free body diagram are gravity (weight), normal force, tension, friction, and applied forces. These forces represent the interactions acting on an object in a given situation.


How a free body diagram allows you to solve force problems?

A free body diagram isolates the object of interest and shows all the forces acting on it. By analyzing the forces shown on the diagram, one can apply Newton's laws of motion to determine the net force acting on the object. This net force can then be used to calculate acceleration, velocity, or any other relevant quantities needed to solve force problems.


Why are capillaries not shown on the diagram?

Capillaries are not shown on the diagram because the are too tiny. They are the smallest blood vessel and are connected to the veins.


What kind of telescope is shown in the diagram?

As no diagram is given, it is not possible to answer your question.