answersLogoWhite

0

Mechanical pressure from the primary piston

User Avatar

Alex Kuhic

Lvl 10
3y ago

What else can I help you with?

Continue Learning about Physics

What happen to the secondary circuit if the primary circuit is close?

If the primary circuit is closed, the current will flow through the primary coil, inducing a magnetic field. This magnetic field will in turn induce a current in the secondary coil, allowing for the transfer of energy from the primary to the secondary circuit.


What are the three circuits of a magneto?

The three circuits of a magneto are the primary circuit, secondary circuit, and charging circuit. The primary circuit controls the generation of an electrical current, the secondary circuit amplifies the voltage output, and the charging circuit ensures the magneto stays charged for optimal performance.


The layout and functioning of a nuclear power station to the three separate water circuits?

See the link below for a description and diagram of a PWR. This shows one water circuit, in designs with three circuits there are three separate steam raising units each in a separate circuit, each doing the same duty. There is also of course the secondary circuit which passes steam to the turbine and returns condensed water to the steam raising units


How does a pressure switch work in a circuit?

A pressure switch works by responding to changes in pressure levels. When the pressure reaches a preset point, the switch triggers a change in the electrical circuit, either turning on or off a connected device. It does this by physically opening or closing internal contacts within the switch.


What is analogous to water pressure in an electric circuit?

Voltage in an electric circuit is analogous to water pressure in a pipe. Voltage is the force that drives electric current through a circuit, similar to how water pressure pushes water through a pipe.

Related Questions

If hydraulic pressure is lost in the primary circuit how does the secondary piston actuate?

Mechanical pressure from the primary piston


Why does a hydraulic technician use gauge pressure when testing a hydraulic circuit?

For measuring the flow of hydraulic fluid.


Functions which valves perform in a hydraulic circuit?

Various valves are used. 1 - hydraulic flow. 2 - adjustable hydraulic pressure. 3 - control of hydraulic flow.


What is static pressure in Fluent. Is it the same as hydrostatic pressure. But why does it increase through the channel sometimes?

Is a closed circuit hydraulic system.


What is the primary function of a pressure differential valve used in a hydraulic brake circuit?

To send more pressure to the front wheels, where it is needed.


What mean codes P1784-P1789 Caravan 2000?

p1784 l-r pressure switch sense circuit and p1789 od/2-4 hydraulic pressure switch circuit.


What does code P0935 mean?

Trouble code P0935 means: Hydraulic pressure sensor circuit high input


What does the code P1789 mean for a Chrysler Town and Country?

P1789-OD/2-4 HYDRAULIC PRESSURE SWITCH CIRCUIT


How do you calculate the volume of hydraulic oil in any hydraulic circuit?

calculate the no of pipes in the circuit & then work out the volume based on the area.


What does a wire do in a circuit?

mini-hydraulic


What is check engine code p1788?

AnswerSymptom:P1788-2/4 HYDRAULIC PRESSURE TEST FAILUREWhen Monitored and Set Condition:P1788-2/4 HYDRAULIC PRESSURE TEST FAILUREWhen Monitored: In any forward gear with engine speed above 1000 RPM shortly aftera shift and every minute thereafter.Set Condition: After a shift into a forward gear, with engine speed > 1000 RPM, the TCMmomentarily turns on element pressure to the clutch ckts that don't have pressure toidentify the correct pressure sw closes. If the pressure sw does not close 2 times the codesets.POSSIBLE CAUSESLOSS OF PRIME P1791 PRESENTRELATED DTC'S PRESENTTRANSMISSION FLUID LEVELINTERMITTENT WIRING AND CONNECTORSTRANSMISSION CONTROL RELAY OUTPUT CIRCUIT OPEN2/4 PRESSURE SWITCH SENSE CIRCUIT OPEN2/4 PRESSURE SWITCH SENSE CIRCUIT SHORT TO GROUND2/4 PRESSURE SWITCH SENSE CIRCUIT SHORT TO VOLTAGEINTERNAL TRANSMISSIONTCM - 2/4 HYDRAULIC PRESSURE


Is there fluid in the pipe leading from the relief valve in a hydraulic circuit?

Yes. Because the relief valve is set to what the maximum operating pressure requirement is, it gets rid of the excess pressure by letting oil out once it reaches the pressure it is set to.