It depends on the density of the wood as it can range from 170 to 1370 kg/cubic metre. At a total guess I would say less than 1 cubic feet.
A cord of wood is a unit of measurement for firewood equal to 128 cubic feet, typically stacked in a pile 4 feet wide, 4 feet high, and 8 feet long. A cubic meter of wood is a metric unit of measurement equal to the volume of a cube with sides measuring 1 meter in length (about 35.3 cubic feet). The main difference is in the volume each unit represents and the measurement system they belong to.
Square feet and a cord of wood are different types of measurement: square feet is length x width; a cord of wood is volume - length x width x height. A cord is the amount of wood is 128 cubic feet, or 4 feet wide, 4 feet high, and 8 feet long.
Answer:With a cord and fractional parts of a cord or cubic meter (AKA a stere).Answer:Firewood is traditionally measured by the "cord".A full cord is a pile of stacked wood 4' x 4' x 8' (128 cu. ft.)A face cord is 4' x 1.5' x 8' (42 cu. ft.)Packages of wood at about 1 cubic foot are available at campgrounds and service stations
I have just weighed a large piece of green oak and it is approx 1000Kg per cubic metre. But this figure will vary widle due to the density and the moisture content of the timber. We supply green oak buildings and there has allways been a difference in weight of pieces of oak of the same size. Hope this helps
A cord of hickory wood typically weighs between 4,500 to 5,000 pounds, depending on the moisture content of the wood.
a cord of wood is equal to 128 cubic feet of neatly stacked wood.
A cord of wood is a unit of measurement for firewood equal to 128 cubic feet, typically stacked in a pile 4 feet wide, 4 feet high, and 8 feet long. A cubic meter of wood is a metric unit of measurement equal to the volume of a cube with sides measuring 1 meter in length (about 35.3 cubic feet). The main difference is in the volume each unit represents and the measurement system they belong to.
A "cord" is a unit of measure for firewood. It is a stack of wood that is 4'x4'x8'. That is 128 cubic feet of wood.
Square feet and a cord of wood are different types of measurement: square feet is length x width; a cord of wood is volume - length x width x height. A cord is the amount of wood is 128 cubic feet, or 4 feet wide, 4 feet high, and 8 feet long.
volume terminolagy for wood used in carpentry is by the Board Foot, 1 inch by 12 inches by 12 inches. voulume for firewood is measured by the cord, a full cord or Bush Cord is 128 cubic feet, normally represented by a pipe of wood 4 feet wide, 4 feet high and 8 feet long.
A cord of wood measures 8 x 4 x 4 (128 cubic ft.) A face cord varies tremendously in volume, but assuming it is 8 ft. long, 4 ft. high and about 12 in. wide: a face cord of wood is roughly 43 cubic feet. Bundles of wood vary as well, ranging from .9 cubic ft. to 1.5 cubic ft. You do the math.
If you assume the cord of wood formed a perfect rectangular prism you would simply multiply the length*width*height to get 128 cubic feet. However, it is obvious that unless the wood is cut into square pieces such as 6"x6" or 4"x4", there will be lots of air space inside your cord. But the basic answer is as above. Hope that helps answer this rather odd question. I disagree that it is an odd question. it is a very good question. Buyers of firewood should be aware of the cubic feet because many sellers sell variations on the cord, and a smart buyer will be able to figure out all the cubic feet variations and know whether he is being shorted by the seller.
128 cu. ft. (4ftx4ftx8ft)
There are about 200,781.25 btu in a cubic foot of oak. A cord of wood amounts to 128 cubic feet.
640 cubic feet
A cord is a dry volume unit measurement used to measure firewood and pulpwood. A cord can be described as a volume of 128 cubic feet of well-stacked cut wood.
64 cu.ft