per one second, it is 200 feet length. in one minute, it wil be 200 x 60 = 12000 feet, ...etc.
By fps I assume it feet per second,hence 400fps=272.72727288 mph
In the fps system, the unit of acceleration is feet per second squared (ft/s^2).
To convert feet per second (fps) to joules, you need the mass of the projectile. The formula to calculate joules is 0.5 * mass * velocity^2. Without knowing the mass of the projectile, it is not possible to accurately calculate joules based solely on the velocity of 300 fps.
The FPS (feet per second) is a unit of speed, commonly used in ballistics to measure the velocity of projectiles. Electrical current, on the other hand, is measured in amperes (amps) and does not have a direct conversion to FPS as they are fundamentally different physical quantities.
The pressure at a depth of 200 feet of water is approximately 86.6 pounds per square inch (psi). This is calculated by dividing the depth (200 feet) by the specific gravity of water (0.433) to determine the pressure in psi.
The Marksman repeater is rated at 200 FPS.
275 fps
FPS stands for "Feet Per Second." BB guns range from 200 FPS to around 500 FPS. Pellet guns and rifles can attain over 1100 FPS depending on the model.
I can not tell you the foot pounds but the FPS (Feet Per Second) is rated at 200 FPS and that is considered very slow for an air gun. A Daisy Red Ryder fires at 350 FPS. The only other air gun that I know of that fires that slow is a Marksman 1010 and it also fires at 200 FPS.
200 Feet Per Second (FPS)
It is rated at 200 FPS
like 200 tops
any where from 200 to 300 fps (feet per second)
200
200
It depends on how big the blocks are.
36.66666666 fps